Having problems with your BenQ FP731 17" LCD Monitor ?

I RECENTLY STARTED USING BENQ MONITOR & NOW I HAVE IRRITATION ON MY EYES. WILL THERE BE ANY RADIATION FROM BENQ MONITORS


Answers :

There's practically no radiation from LCD monitors, especially compared to older CRT monitors, which radiated several sorts of electromagnetic waves.

Is the picture on your monitor crisp, with good focus? If the letters and shapes are blurry, it may mean that you are using a different screen resolution than the native resolution of your LCD.
If your monitor type is FP731, then it's native resolution is 1280x1024 and this is what should be set in the Display Properties under Settings tab (in Windows). If it's a different model, you can search for it's specs on the web to see what is it's native (a.k.a. optimum) resolution.

Please rate and possibly leave a testimonial if helped.
Repair Help & Product Troubleshooting for BenQ FP731 17" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I RECENTLY STARTED USING BENQ MONITOR & NOW I HAVE IRRITATION ON MY EYES. WILL THERE BE ANY RADIATION FROM BENQ MONITORS


There's practically no radiation from LCD monitors, especially compared to older CRT monitors, which radiated several sorts of electromagnetic waves.Is the picture on your monitor crisp, with good focus? If the letters and shapes are blur ... BenQ FP731 17" LCD Monitor

CANNOT REMOVE THE OSD MAIN MENU FROM MONITOR SCREEN


Hi,\015\012The problem of OSD Menus popping up automatically are usually caused due to a faulty switch in the Menu button which is getting switched on automatically. \015\012\015\012This menu will not harm the computer but constant ... HP Pavilion F1503 15" LCD Flat Panel Monitor

Comp makes a buzz noise and wont show any start up


Suggest you,A) Look at the back of the computer at the Power Supply fan, and tell me if it's spinning. (Where the power cord plugs in, is the Power Supply)B) Open the computer case, look at the Processor fan, and tell me if it ... PC Desktops

BeNQ FP71E Monitor won't display desktop


The problem seems to be with the monitor.When there is no Display,if you power-off and on again do you get a Benq Startup screen?If not the problem should be dry solder on the Invertor board.Try tapping screen lightly,if it comes on the problem is dr ... BenQ FP71E 17" LCD Monitor

My monitor is still working but has an odor coming out of the vent holes of back cover. This is a Fuji 19" LCD Monitor (Model: FP-988D) abut 2 years old. All features still seem to work but I have stopped using it due to the odor and suspected impending failure. Any suggestions??


It is normal for computer monitors to run hot and smell outof the vent holes. The question is how much and how bad.Under-sized power resistors on the circuit board often smelllike burned toast, this is normal. If the smell is ... PC Desktops

Mymonitor started flickering constantly,just started,help


I do not want to pay for assistance, my monitor is under warranty. I want to know where i need to call or go to have monitor repaired or speak to someone "without having to pay".That is not under the warranty,having to pay to speak to someone just to ... Proview PL926WBi 19" LCD Monitor

Benq monitor flashes primary colours when switch on or off


This is called burn-in mode. Used to test the monitor at the factory.\015\012To fix this, use the buttons under the front of the monitor,\015\012There are six buttons. Let's number them 1 to 6 from the left.\015\012Press 6 to displa ... BenQ FP71E 17" LCD Monitor

Dell 20 Hi my dell lcd monitor won't gon after i saw a smoke . I open it and don't see anythink burnd bye Dave


Dear Tirat\015\012\015\012Hello Dave, well unfortunately your problem here is not going to be all that easy to resolve as components that burn out are not always visable to the naked eye. However, there are logical methods of approach tha ... Dell 2000FP 20.1" LCD Monitor

How can I make fonts look good in an LCD monitor ?


The VGA connection should be fine; I have DVI and when I switched from analog, the difference was pretty minimal, to my eyes.Is it just the fonts that are blurry, or everything? If fonts only, then this almost certainly suggests that run ... LG Flatron L1750S 17" LCD Monitor

BENQ FP737S Monitor shows "No Signal Detected" on startup


First problem could be the hdmi cable you are using is loose or broken.second, the display mode you selected was wrong, try to go to desktop and right click and choose nvdia control panel and choose the nview display mode to use,select the only use o ... BenQ FP71E 17" LCD Monitor

Power but no picture


Try to re-solder the inverter part of the board. You may recognize that part where the 4 connectors from the backlight tubes can be found.... usually the small transformators (sorry, my technical English is not good) have bad soldering eyes after lon ... BenQ FP71E 17" LCD Monitor

Monitor randomly decides not to display


The problem is dry solder on Invertor board.Resolder all Invertor transistors and transformer. ... BenQ FP767 17" LCD Monitor

Benq FP222W Every time I switch on, or the signal to the monitor changes, the message "Input D-sub" appears. This is very distracting. Is there any way to stop this? Thanks Don all of the monitor settings that are normally displayed by pressing the buttons under the monitor keep flashing up ans switching from main menu,Miscellaneous, input select ,color etc. as though someone is actually pushing the buttons. makes using the computer very hard


Your monitor must have multiple inputs (Dvi,D-sub) so it searches when you start for which input is connected.\015\012If menu popping up intemittently is your problem,The culprit is generally defective (Leaky) Key switches.You need to pen up mo ... Computer Monitors

I have a dell inspiron 9300 with win xp pro for an os, my lcd screen is broke, so i took it off completly. now i am trying to hook up an benq fp567s monitor through the vga output. it will get me as far as desktop screen just after boot up. & most of the time it goes in to sleep mode before start up is complete. the screen suddenly displays "no signal" ?


Many people have noted two primary failures with this monitor. i have a couple time-saving troubleshooting tips, which actually apply to mostly all electronic devices. first, of course, bulging electrolytics [capacitors] should be considered suspect. ... BenQ FP567s 15" LCD Monitor

BenQ FP 731 17" black LCD


It sound like power on the monitor if it is this what you need to do.\015\012\015\012Change the 2SC5707 transistors and electrolytic caps in the invertersection. Also check the 3A picofuse, and resolder all transformerpins. Ar ... BenQ FP731 - 17" LCD Monitor

I have an Acer AL1916 monitor. I recently plugged an Optima 19" widescreen monitor in to my computer. I did not like using this as all the fonts were small and too hard for my aging eyes to see!! I have also been using a normal 4:3 monitor for years and did not like the widescreen. When I plugged my Acer AL1916 monitor back in to my computer, all the fonts, etc., have stayed small. I have tried adjusting the resolution in the display settings of the control panel but, whereas that does ma


Go to start -> all programs->accessories->accessiblity->accessibilty wizard.click on next and see around ... Acer PC Desktops

Unable to print using samsung print on Windows XP


To resolve this issue, follow these steps: 1. If you do not have a Lexmark printer installed, go to step 4. If you do have a Lexmark printer installed, go to step 2. 2. If the Lexmark print service is installed on your computer, turn off the Le ... Samsung PC Laptops

Trying to use my hp laptop with sony lcd hdmi tv for movies


You should have an S video port on both tv and computer.\015\012\015\012If your tv don't have s video input,you can get an S video to RCA cord.If the tv does have s video input,just get an s video cable and plug it into the tv and c ... HP Pavilion dv6000z Notebook

Laptop to tv


If your tv don't have s video input,you can get an Svideo to RCA cord.\015\012If the tv does have s video input,just get an s video cable and plug it into the tv and computer s video ports and follow the steps below for setup.\015\012 ... Toshiba Satellite L305D-S5895 Notebook

Monitor For some reason, one day the screen darkened. You can see everything but it is not very bright and starts to hurt your eyes after awhile. Now, I can press the up arrow button on the monitor itself and it will brighten up the way that it should be but will not stay that way. All the other buttons on the monitor itself don't seem to do anything.


This is a setting on the system. What computer are you using. The settings might be changed in the control panel if you are using XP ... Gateway FPD 1730 17" Flat Panel LCD Monitor

BenQ fp567 goes on a flicker mode and will not respond


The fault could be a faulty inverter or a faulty CCFL lamp.The inverter supplies high voltage to the CCFL lamp, if faulty the CCFL lamp can flicker or not light up. The CCFL lamp is a mini fluro lamp, and flicks on and off when faulty especiall ... BenQ Computer Monitors

Monitor turns black after 3 seconds


Teo6925, "Switch-mode-power-supply" is in partial shutdown mode. Can you see any electrolytic filter capacitors that have a slight "swelling" to their tops? They should be flat!! You may also need to inspect all the soldered component connections ver ... BenQ Computer Monitors

Is this a problem?


Hi Viv,\015\012\015\012Hope this will give you hints. If you haven't noticed first day you bought and used it with this negligible glitches you mentioned. There are factors to test and consider; try adjusting resolution frequencies (lower ... Acer AL1716 17" LCD Monitor

There is a problem with my BenQ monitor T52WA series. The problem is appear blue lines on the monitor. And I just use it. What i have to do first... Thx before.....


IS THEIR SOUND IN BENQ T52WA MODEL IF YES THEN HOW CAN START THE SOUND ... BenQ Computer Monitors

Not working I am not sure what the problem is, but its when i turn the laptop on it doesnt work. the only thing that works is the power light it goes on and then thats it, the light stays on, but the monitor and laptop do not do anything. the monitor stays plain black and thats it. i tried taking out the battery, and putting it back in, but it didnt do anything. my problem sounds similar as well. it's an hp/compaq nx5000. when i try to power on, a green light flashes at the bulls eye symbol,


Hey guys solution is very simple, your power socket in notebook is not working properly, either get it resolder by professional, or you want to start by yourself then push your power conector cable up and down at ... HP Compaq nx5000 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0661 seconds