Having problems with your Compaq P110 21" CRT Monitor ?

Compaq P110 21" CRT Monitor that is blurry in the middle of the screen and clear and crisp on the edge

\015 I've purchased a second hand Compaq P110 monitor and recently realised that the centre of the screen is ever so slightly blurry and that the edge of the screen is clear. I have tried degaussing it and playing around with the settings to no avail. I am assuming that this is just the tubes getting old. Am I right to assume this? Is there anything else I should look at? Furthermore, if it is the tubes, should have them replaced? Where?\015\012Thanks,\015

Answers :

As a result of aging monitor alignments drift, giving rise a a myriad of odd symptoms. Open the monitor up (of course it's got to be off), locate the scanning coils on the neck of the tube. Right there on are disk-shaped permanent alignment magnets. The scanning coils are electromagnets that produce the raster (scanning pattern), while the low-strenght permanent magnets allow the alignment to be varied ever so finely. Chances are that this alignment has drifted. Reconnect and turn on the monitor and with something being displayed, turn the disks one-by-one, observing the effect on the screen (a large mirror in front of the monitor would help much). Note that normally the disks are secured at the factory using hot glue. You may want to warm up the glue before starting the re-adjustment to make it easier to turn the disks. I am quite certain that this will solve your problem.
Repair Help & Product Troubleshooting for Compaq P110 21" CRT Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Compaq P110 21" CRT Monitor that is blurry in the middle of the screen and clear and crisp on the edge

As a result of aging monitor alignments drift, giving rise a a myriad of odd symptoms. Open the monitor up (of course it's got to be off), locate the scanning coils on the neck of the tube. Right there on are disk-shaped permanent alignment magnets. ... Compaq P110 21" CRT Monitor

Screen image display distortion

Hello.\015\012What you are reporting is a problem in the pincushion circuit in the horizontal section of your CRT monitor. Usually this is from an electrolytic capacitor that is no longer willing to play nice with all the other components. ... Apple Multiple Scan 1705 Monitor

Text/picture shadow Recently I've noticed what appears to be a shadow appearing mostly with text but in some picture as well. It makes the screen look a little blurry. It's not bad but just enough to irritate me. Any suggestions?

Hi rustybob,I have a solution for ya, but there are a couple of variables that could be involved. I assume it's an LCD monitor? How many inches is the viewing area, and what model is it? When you look at an LCD monitor, you pay attention ... Gateway FPD2275W LCD Monitor

How can i open the 2405

To open the case of DELL 2405FPW (and 2407FPW and many others): first prepare a clean, clear area of bench to work on. A cluttered bench could result in damage to the screen when you lay it flat on its front!a) unclip the panel from its stand a ... Dell UltraSharp 2405FPW 24" Flat Panel LCD Monitor

Sony 24'' CRT widescreen GDM-FW900 blurry after initial on

CRT shorts are common with this model and focus problems are a major symptom. however, the loud 'pop' you described leads me to believe that the flyback transformer may have a problem in the focus divider portion. replace the flyback, if that fails t ... Sony GDM-W900 24" CRT Monitor

Mitsubishi xc-3716c monitor

Model (XC-3716C)Manufacturer's product descriptionMitsubishi represents the pinnacle in technological achievement for multi-person viewing of workstation generated, high resolution imagery such as CAD/CAM/CAE or scientific visualiza ... Computer Monitors

A really loud cracking noise, akin to a 'zap', and the screen distorts

This may be happening because the tube was not fully clean when sealed and some particles left inside are finding homes next to high voltage. or the power supply is beginning to fail and arcing internally where it finds shortcut electric paths inside ... Compaq P110 21" CRT Monitor

Red colour missing

- A bended color pin at the VGA connector. (If pin one is bend then there would be no red color)- A defective VGA signal cable. If the internal wires were broken then there would be missing colors. You can check if the signal cable is goo ... Compaq P110 21" CRT Monitor

Vertical lines in my laptop screen

I know not everyone has this ability, but if you can, go to a friend's\015\012house and hook up an external monitor to your laptop. You may need to\015\012use the function keys to switch from LCD to external, but if the lines\015\012go away on the ex ... PC Laptops

Vertical lines in my laptop screen

There can be 3 possible reasons for this1)Screen connector cable is loose. You can try to re-seat it and see if works.2)display card problem. Connect your laptop to an external monitor and see if the problem persists. If it does not then ... Dell Inspiron 6400 Notebook

Monitor moving on its own

On your physical monitor adjust the verticle and horizontal lengths to take up the full length of the screen. The CRT guns have to draw the exact location of your screen, so extending them to the edges will be easier on the guns. You can also try r ... Compaq P 1220 22" CRT Monitor

My monitor crt a90f+ viewsonic blurry

Ensure that the monitor's UltraBrite mode is off, via the "UltraBrite Mode" button on the front panel. UltraBrite is great for games and movies, but it tends to fuzz plain text ever so slightly. ... ViewSonic A90f+ 19" CRT Monitor

Bluish screen -

Is it a greenish blue?..... if so you have lost your red signal..... check your monitor connectors for bent or broken pins...... usually happens after swapping cables or monitors on a computer..... you could also have a bad cable or monitor.....\015\ ... MPC Computers Envision EN 5100e 15" Flat Panel LCD Monitor

My LCD show me "Out of range" when it is loading the windows. I need the driver. Thanks.

Hello. In most Windows PCs today, there is not a big need for LCD Drivers, since most LCDs have a native resolution which the Operating System can support natively.\015\012\015\012The Out of Range issue appears when your resolution is set ... AOpen F2705 17" LCD Monitor

My EV 700 screen picture is condenced has one bright clear line in middle screen and two more lines faded,space in between lines

Sounds like a CRT problem but to be sure, hook up another monitor to the computer and if you get the same exact lines then you know its a problem with the video card, if the lines go away then you know its a problem with the monitor. ... Gateway EV 700 17" CRT Monitor

Compaq FP 5315 Moniter

Have you checked the computer bios?\015\012\015\012 \015\012\015\012In case an item was changed in the BIOS, such as the primary display device setting, use the following steps to reset the BIOS back to its default configuration:\0 ... HP Compaq FP5315 15" LCD Monitor

Vertical lines in my laptop screen

I had the same problem - sent it in to Acer and they replaced the LCD for 500 bucks! ... Acer Aspire 9500 Notebook

Bright,thin line, in the middle of the screen, then...

1. \015\012I turn on the monitor, I hear a 'cracklin' sound Reply: In a CRT Monitor there is a component called EHT which generates High voltage which is connected to the anode of the CRT, If there is any leakage due to moisture can cause ... Hitachi SuperScan Elite 802 21" CRT Monitor


There's practically no radiation from LCD monitors, especially compared to older CRT monitors, which radiated several sorts of electromagnetic waves.Is the picture on your monitor crisp, with good focus? If the letters and shapes are blur ... BenQ FP731 17" LCD Monitor

LG Flatron L1932TQ won't turn on

I have the exact same problem. Just like Ptepe, I also found the 680uf/25v and 1000uf/16v capacitors in positions c203 and c204 on the Power Supply PCB to be bulging on the top. I considered replacing all of the electrolytic capacitors on the board, ... Gateway FPD2275W LCD Monitor

How do I replace the keyboard in a HP Pavilion dv6451us laptop

To start I suggest you have a No.1, and a No.2 Philips head magnetized screwdriver, a small pair of Needlenose pliers, and a multi-compartment container for the screws.(When working on a laptop this is the ONLY place I would advise using ... HP PC Laptops

My l g monitor screen suddenly turned into pinkish colour..i dont know whats the problem..i did degaus also but no use..

Dear Sir \015\012Welcome to Fixya Customer Support \015\012We will Help You\015\012Generally this problem arises due to faulty monitor Signal cable or by broken fins of VGA cable.check your monitor connectors for bent or broken pins ... Computer Monitors

No color red displays.

If you think that electronic repair is very difficult to learn then you have to read this article where only by using a solder gun could solve a Monitor color problem. Of course there were many tough dog cases (very difficult to find out the fault) i ... ViewSonic G70fmb (Black) 17" CRT Monitor

Monitor screen display stretched center but squashed/narrow edges

On the monitor itself, I am guessing this is a desktop? There are buttons for adjustment. Look for the menu button around the bezel of the monitor and press it. Scroll through the settings for the default setting and press that. Once the default sett ... Computer Monitors

Notebook with a cracked monitor

Not to sound argumentative, but it's not a useless paperweight yet. You can still connect an external monitor, and toggle over to it.(Connect a VGA monitor, to the VGA connector on the back of the laptop, turn the VGA monitor on. Hold the ... PC Laptops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9601 seconds