Having problems with your HP Compaq FS 7550 17" CRT Monitor ?

Screen Adjustment My screen has a black line down the right side of about 1/2 inch and across the top of about 1/4 inch. I can not find the instructions on using the buttons on the front of the monitor nor can I get them to work properly. Can you send me these instructions so that I can adjust my screen?? Thank You:


Answers :

On your monitor at the bottom there is 3 buttons. The one all the way to the left is the "menu" button. The next one (going right) is the "NEGATIVE" button. The next one (going right) is the "POSITIVE" button.

You can move your screen around. First, start by pressing the menu button.Then, a menu in blue, with a bunch of little white icons will appear. Next, go over two icons by pressing the positive button twice. Then, proceed to push in the "menu" button again. A bar will appear. By pressing your negative button, your screen will move left. Pressing your positive button will make your screen move right. Adjust your screen until the black on both sides are of even proportion. Then, press the menu button to return to the orginal menu you started at. Proceed to press your positive button two more times. Then, press your menu button. Then, once again, use your positive button, and your negative button to adjust your screen to even out the black on the top and bottom.


Repair Help & Product Troubleshooting for HP Compaq FS 7550 17" CRT Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Screen Adjustment My screen has a black line down the right side of about 1/2 inch and across the top of about 1/4 inch. I can not find the instructions on using the buttons on the front of the monitor nor can I get them to work properly. Can you send me these instructions so that I can adjust my screen?? Thank You:


On your monitor at the bottom there is 3 buttons. The one all the way to the left is the "menu" button. The next one (going right) is the "NEGATIVE" button. The next one (going right) is the "POSITIVE" button.You can move your screen arou ... HP Compaq FS 7550 17" CRT Monitor

Dead pixel I have a black spot on the bottom right corner of the screen..can it be repaired?


\015\012Please read the WHOLE of this guide before starting.\015\012Software Method\015\012\015\012Try running pixel fixing software. Stuck pixels can often be re-energized by rapidly turning them ... HP Compaq WF1907 Monitor

Trubleshoot Motherboard what is mother board prob and how can find n fix them....


More than 70% of all computer problems are related to cabling and connections. Ensure all cables are connected and connected firmly. IDE and floppy ribbon cables and power cables can often go loose. Ensure microprocessor, memory modules, and adapters ... PC Desktops

Faulty Monitor? I bought one of these Xerox flat panel 19 inch monitors to replace my convention Sony unit about 4-5 months ago. It has worked just fine until about 7 days ago. Are there any known problems with these Xerox units? I turn my computer off during the day, when I am at work. I also turn my computer off during the night when I am asleep. At those night times I also turn the 'blue power button' on the monitor off as well, as it will flash annoyingly in the room if left in the 'stand


I have also fixed my wife's Xerox monitor Thanks to all the posts on this website !!! I just fixed it yesterday. It was fairly easy.\015\012\015\012 I layed my on a clean towel. Like they said remove ... Xerox XG-91D 19" LCD Monitor

Monitor stays on for a few seconds then goes out


This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

Toshiba desk-top screen is quite dim. why?


1. adjust the monitors brightness and contrast\015\0122. adjusting the brightness and contrast with your video card software\015\012\015\012if that fails\015\012\015\0121. decide if the monitor is worth the money to repa ... Computer Monitors

Screen goes black


This problem is fixable with no parts.\015\012the ribbon cable inside the back of the monitor most likely is loose.\015\012if when the screen goes black you can tell that the back light is still on inside the screen then this fix is definitely ... HP Compaq nx5000 Notebook

Flickers on and off


I also had the same problem with the same monitor. The capacitor cost $1.68 at the radio shack (30117), however, the clerk had no idea what I was talking about and had to locate the drawer myself and sift through trays to find the correct ... Liquid Video L17LCD2 17" Flat Panel LCD Monitor

Acer AL1916W has black screen


The backlight in your monitor isn't coming on, so all you have is that faint image you see. This trouble is\015\012frequently because of capacitors in the monitor which fail. Often these\015\012parts (cylinder shaped, usually a couple of ... Acer AL1916W 19" LCD Monitor

Relisys 17in tft monitor


Hi everyone, i have a relisys monitor and had this exact same problem where the menu screen comes on and then cycles through the various options until it gets stuck in a loop within the colours settings. - the solution i found ... Relisys TL 766 Monitor

Gateway FPD 1730 Monitor


What has happened is part of your back lighting circuitry has gone out. Yes it is repairable but can cost most of what a replacement monitor will cost these days. Check that out before spending the money. If the problem is only in the back lighting c ... Gateway FPD1775W Monitor

Building a new PC, cannot get LCD to work


You MUST get into bios to set "initalise display first"selection.\015\012try alternatly pressing delete,or f1 keys toget into bios.\015\012one of the two will get you "in"\015\012\015\012then follow instructions at bottom of s ... E-Machines eMachines T3830 PC Desktop

MY hp pavilion zv6000 laptop SCREEN IS NOT TURNING ON!


There does appear to be a batch of these pc's that have this problem & must be returned to HP for repair.. Having said that, there are a number of tests you can do to decide if you can find a solution yourself..\015\012\015\012Is ther ... PC Desktops

Monitor powers on for approx 8 secs then standby.Series of vertical stripes on panel but no image.Guessing the lcd is at fault?


When I applied the solution below, I go stripes when poorly reconnecting the logic board to the plate, and the plate ability to do it job can be effect by bits going on the inverter, wavely screen output etc. The lcd is an assembly kit inside have a ... iiyama ProLite E434S 17" LCD Monitor

I had major repairs done on my XP computer.Everything works fine except that the monitor screen position needs to be moved an inch to the left. I do not have a manual to guide the process.My monitor is less than 5 years old.It is called Samsung, Syncmaster 955DF Could you e-mail me some instructions on how to correct the position? Ed. Klassen


Go to this link and click the popular question no. 27, "the image of my CRT is not fit the screen"\015\012 ... PC Desktops

Bios problem Power On Self Test (POST) Beep Codes and Bios Error Messages


Standard Original IBM POST Error Codes1 short beep\011Normal POST - system is ok2 short beeps\011POST Error - error code shown on screenNo beep\011Power supply or system board problemContinuous beep\011Power supply, system board, or ... PC Desktops

Having turned the PC off, when I have turned it back on the monitor has not turned back on. Since i have displaced the original instructions, and not knowing the functions of the buttons on the side of the panel i am unable to get the screen (monitor) working. I accept I am a bit of a plonker (dunce), but even I can usually get this to work. What simple thing am I missing?.


Hi,\015\012\015\012There must be power button on the monitor, clicking the button will power it on...\015\012\015\012Here is the instruction manual for your monitor, Please click on the below link to download the instruction m ... Samsung SyncMaster 2233BW 22" LCD Monitor

Wont go to normal start up screen!!!


The screen that you're seeing is the self-test of the monitor, as it's already stated. It's commonly caused by having no signal coming from the computer to the monitor. You were advised to check the monitor cable, if you have already done that, then ... E-Machines eView 17f3 17" Flat CRT Monitor

Screen Flickers Hey everybody, if anyone can help i would greatly appreciate it. The screen will be good for a while but it will slowly start to flicker and then it will start flickering really bad. Any Ideas


MONITOR ABCs\015\012The monitor is a hardware device which physically connects to your video card. The monitor allows information and current ... Sony VAIO PCV-V200G PC Desktop

Can't set up network w linksys modem


Video card:Your computer has an integrated video card but has a "PCI Express" expansion slot for an upgrade. After the upgrade you will be able to play most games without the choppy frame rate...depending on what card you buy. Since ... PC Desktops

Installing more memory


Hi if you go to this site first www.crucial.com then look on the site and it will then scan your computer for you telling you exactly what memory you need like p100 or p133 as getting the wrong one will cause your computer to stop working ok. ... Compaq Presario 5000 PC Desktop

Th these PC Desktop problems? Averatec D1002UHCE-1 All-In-One Intel Desktop PC - Intel Core 2 Duo E4600 2.4GHz, 2GB, 320GB, DVDRW Averatec D1002UHCE-1... I have an all in Solve I have an all in one averatec computer and when I turn it on I get as far as putting in my password... (More) I have an all in one averatec computer and when I turn it on I get as far as putting in my password and the the screen goes black and nothing happens. Sometimes I can shut the computer off and on a couple times an


Try to work through the steps in this article. or ... Averatec D1002UHCE-1 All-In-One Intel Desktop PC - Intel Core 2 Duo E4600 2.4GHz, 2GB, 320GB, DVDRW

EVGA Geforce Nividia 5200 video card. Works with IIYama Vision Maker 450 monitor when using Windows XP. Doesn't work with Ubuntu (Linux). Computer = Dell Dimension 8200. Would like it to work with Ubuntu, too. Loaded Ubuntu from Windows. Works with a different monitor OK. IIYama VM 450 monitor is nice. Still works. When I choose to boot from Ubunto, the round Ubunto icon is in the middle of the screen and then all goes blank. Has anyone else had this problem?


1) Boot your PC2) when the grub menu appears, use the down arrow to get to the menu option listed as (rescue system)3) when the text-based menu appears, choose a menu option that gets you to the root shell, then following the instructions ... ViewSonic VP230mb 23.1" LCD Monitor With Speakers, Black

Monitor goes blank less than a second after turning on.


If you put bright light at an angle close to lcd can you see a windows shadow, text icons etc, ie still logic power passing,then .... (from a.n. other) after two weeks searching I finally find doctor living stone http://www.aplusperfect.com/articles/ ... Dell E176FP 17" LCD Monitor

My monitor shuts off(goes blank for a few seconds


The monitor is doing a self test a finding an error.The lcd has three parts, the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, ... LG L1915S 19" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.1479 seconds