Having problems with your HP Pavilion F1503 15" LCD Flat Panel Monitor ?

Monitor will not turn off and keeps flashing the words Auto processing

\015 For some reason my monitor will not turn off. When I turn my computer off the monitor remains in standy and does not respond when I touch the power button. Also the colors on the monitor are very bright and the screen keeps twitching and a box that says "auto processing" keeps popping up.\015\012\015\012Constantly blinking Menu on the monitor emachine/gateway LE1799 model\015

Answers :

It is not a bad rom. if it was a rom it would constantly act up but it only acts up upon overheating. The solution is difficult but if you open the monitor you can find all of the heatsinks take them of and replace them with bigger ones. or have a fan blowing on it at all time it is active i added bigger heatsinks to my emachine le1799 and it solved this problem of pulling up menu and changing setting by itself and the lack of the ability to turn power of.
Az,
\015\012
\015\012My monitor is an hp pavilion f1503, at least 4yrs old.
\015\012
\015\012And yes, I did push the power button, repeatedly (the first few months that this happened, not every few seconds). And now, again, it won't shut off at all. I'm pretty much thinking I'm screwbied until such a time when I want to go spend the bux on a new monitor, and by that time a new pc as well!
\015\012
\015\012The only way to get the menu to stop blinking on and off is to slide a piece of plastic (like a keyring discount card) on top of the Menu button on the monitor. Otherwise, menu keeps popping up, and it goes directly to the brightness/contrast submenu, and then adjusts itself from +100 to -0, on the brightness. It's just possessed.
\015\012
\015\012Seriously.
Repair Help & Product Troubleshooting for HP Pavilion F1503 15" LCD Flat Panel Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor will not turn off and keeps flashing the words Auto processing


It is not a bad rom. if it was a rom it would constantly act up but it only acts up upon overheating. The solution is difficult but if you open the monitor you can find all of the heatsinks take them of and replace them with bigger ones. or have a fa ... HP Pavilion F1503 15" LCD Flat Panel Monitor

Monitor will not turn off and keeps flashing the words Auto processing


Unplugged/plugged power cable on monitor. problem went away ... Gateway FPD1975W 19" LCD Monitor

My Samsung 943N LCD monitor will work for 1 second and then goes black. When I choose the extended desktop option, for example, it will flash my desktop on the monitor for a second and then go black. I have 2 cords that I have tried this with and it happens with both...and I have 2 computers I have tried it with and it hasn't worked with either...so it definitely appears to be a monitor issue. Because it works for a second I am really confused with what it could be (it's not the graphic card obv


Becky_bitz, Do this first! It is only a "rude&crude" evaluation of the state of the monitor's "switch-mode-power-supply" Reconnect 943N to a fully booted KNOWN GOOD pc that has WIN-desktop showing. Then and only then, turn on the 943N and note w ... Samsung 943N LCD Monitor

Lcd monitor power light flashing with no img. seems 2 be frozen


The display is in safe mode and you will need to reset the display to get the display out of the safe mode. There are 2 different model revisions. Please choose the method that will match your revision. Depending on the revision of the monitor, one ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

Elo ET1725L with no video. Flash on screen on


When LCD's "turn on" momentarily before going blank again it is an indication that the backlights have worn out. Cold Cathode Floursecent Lamps (CCFL's) have a limited amount of hours which they can be in operation for before the mercury vapor in the ... Elo Entuitive 1725L-MSR (Dark Gray) 17 in. Flat Panel LCD Monitor

Auto Processing message flashing and screen twitching


I got rid of the "Auto processing" flashing on my monitor by just firmly TAPING DOWN THE MENU BUTTON ON THE SIDE! yeaaaaaa! ... E-Machines eMachines Monitor E15T4

Processing auto configuration keeps coming up on


... Gateway FPD1530 15" TFT LCD Flat Panel Monitor

Monitor keeps flashing "Auto processing"


Hi\015\012\015\012Do a factory or monitor reset from the monitor menu. ... Gateway FPD1975W 19" LCD Monitor

Processing auto configuration


Check your settings in "Power Options Properties". \015\012Control panel/ power options/ advanced/ under power buttons make sure you have "shut down" when you press the power button on your computer.\015\012I hope I am understanding your ... Acer AL1711 17" LCD Monitor

My new 21' flatscreen monitor keeps shutting off :(


Usually when an LCD display shuts off on it's own this can be a power supply issue. I would say if you checked all the connections you may want to contact the manufacturer. If it is only a few months old then you should be able to get it replaced und ... HP Pavilion F1703 17" LCD Monitor

Reboot Please help me with this. I have been on the internet looking for a solution on how to reboot my computer but many of the solutions are not for what state my computer is in. My monitor will not turn on when I turn the computer on, it keeps flashing but wont turn on and the last time it did come on the words that appeared where Warning computer needs to be rebooted ( those are the words I can remember). There is only 1 Bio beep and the keyboard would not work. The keyboard lights flash whe


Make sure you unplug the computer, check to see if your memory is in right and in the right place. plug back in and restart. unpluging each time helps. the motherboard could be bad and or the power box, check the cpu chip to make sure it's in right, ... PC Desktops

Lg CRT monitor model 500g 17inch -out of frequency


First, you did a great job of explaining and starting to identify the problem. You also eliminated a few things that we would have tried along the way.\015\012PROBLEM DEFINITION: The real issue (as you may already know) appears that the operat ... Computer Monitors

Colour changing i have a iiyama prolite e435s monitor and it keeps changing colour can anyone help me with this problem


I found this on another site:\015\012[QUOTE=numbnutjas]I had the same problem along with lots of others who bought this great prolite monitor.Whenever you turn the power off for more than five seconds the monitor looses an important ... iiyama ProLite E434S 17" LCD Monitor

For the past week, when my Sceptre LCD monitor goes to sleep after inactivity, it won't restart immediately. The blue LED blinks every second or so; eventually, the screen begins to flash the display, and then a few minutes after that, will finally turn on. Sometimes the whole process takes five minutes, sometimes an hour. How can I fix this problem? (I can't find the documentation to say exactly what model this is; if that's important, I can look again.)


Hello there Jake.\015\012\015\012Here's your geek-steer ...\015\012\015\012== CLARIFICATION ==\015\012\015\012When you say "sleep", are you certain it's sleep mode, as oppo ... Computer Monitors

My Relysis TL 766 LCD monitor keeps flashing 'Auto Adjustment'. I am unable to stop it


The first button is the E-power button for the Auto preset\015\012function.With it you can select presets like text, standard, graphics\015\012etc. depending on your use.When you select any button the options\015\012are displayed at the bottom ... Computer Monitors

My Samsung SyncMaster 2463UW no longer auto detects the video input. I normally use it with my MacBook Pro - I turn it on, it detects the digital output and Bob's your uncle. Today, I turned it on and it continues to cycle through analog, digital and HDMI input sources. However, I can actually see the correct output when it switches to ''digital'' mode - it just won't stay there.


OK UncleBob...Try this for me..does hitting the menu button on the monitor do anything for you?..NO huh...Do any of the other buttons (besides power) do anything for you?..Probably not?! Your in the early stages of my fixed problem...Is your warranty ... Samsung SyncMaster 753S 17" CRT Monitor

Monitor Goes black, or flickers on and off


The high pitch sound is coming from the inverter. It is faulty and needs to be repaired or replaced. The inverter supplies high voltage to the CCFL lamp, this lamp gives the backlight to the LCD so you can see the LCD images.\015\012Check out L ... ViewSonic OptiQuest Monitor

My auto adjust keeps flashing on my HP w2207h monitor. It's a little over a year old. This happens every 5-10 seconds blacking out the entire screen really annoying. When it doesn't flash, the volume box appears sometimes taking up the center of the screen & I have to move my browser window aside to see the page. It also turns the setting down as if the - button is stuck. It does the same thing if you can get it to switch menu options. I've checked the cables/ wires, they're connected good. I've


Check the resolution setting of display adapter if the problem persists then its the fault of monitor ... HP W2207H 22 Notebook

Samsung SyncMaster 720N ...


OK, I've figured it out! There's something wrong with the control chip,\015\012so if you don't have it under warranty, here's what you can do:\015\0121. Turn off the monitor \015\0122. Unscrew the face of the monitor \015\0123. Remo ... Samsung SyncMaster 720N Monitor

First of all let me preface this by saying that I don't chat a lot and I don't use abbreviated words so I might wear your patience thin because I type kinda slow. Nonetheless, I have a dell E773c monitor and that auto menu or the menu you use the buttons on the monitor to adjust contrast and the like keeps flashing on and off. It's annoying to say the least. I tried to uninstall the drivers. Didn't work. Do you have to say about this?


Hi, I would say its nothing to do with your drivers as these basically tell the pc what monitor you have and how to interact with it. It sounds like the buttons and/or associated circuits on the monitor relating to the monitor menus are on the way ou ... Dell E173FP 17" LCD Monitor

The monitor turns off and on repeatedly.


I have been repairing LCD monitors for several years now. i work as a technician in a steel plant and we have hundreds of these in service. What i am finding is that it doesn't Matter what brand it is or what model. If the Screen is flashing on/off/o ... Acer AL1715 17" LCD Monitor

Monitor goes to standby mode intermittent.


Make sure the video cable is inserted firmly. is it is, the video cable wires are loose inside the monitor which it is not getting the signal, telling it to go on standby mode. ... LaCie Electron III 22" CRT Monitor

Toshiba 5205-s503 won't start up


In my 15 year career in electronics, among other companies, I have most notably worked for United Technologies as Test Engineering Technician and as an Electronic Failure Analysis Technician for Jabil (Circuit.) I am unemployed due to US electronics ... Toshiba Satellite 5205-S503 Notebook

The blue light of the monitor keep flash and no picture appears on the screen


Is it a Princeton monitor? If it's several years old, that's generally caused by capacitors wearing out on the main board. The monitor is hard to take apart, but if you do get it apart, you will see bulging capacitors on the board. These should be ... Medion MD 7317 17" Flat Panel LCD Monitor

ViewSonic Monitor has trouble to wake up after been shut down?


... ViewSonic VG2030wm LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8540 seconds