Having problems with your Dell PowerEdge 700 Server ?

Constant beep on poweredge 840 appears to work alright

\015 Server appears to be working ok but is emitting regular beep, this disappears when driving processor hard or re booting temp on processors is 39\015

Answers :

Hi
\015\012
\015\012Besides standard beeps codes indicating Processor, CPU, Memory or Systemboard failures,
\015\012Dell PERC (PowerEdge Expandable Raid Controller) or SAS Controllers (Serial Attached SCSI) generate beeps to alert failures on the RAID sub-system.
\015\012
\015\012From your description of the issues (when the beeps start), i suggest you check PERC or SAS setup. If you have Dell OpenManage Server Administrator installed, you can log-in and check for more information. Additionally, on the next reboot check the PERC/SAS/CERC boot up for any messages. You may also access the PERC (Ctrl+M), SAS (Ctrl+R) CERC (Ctrl+A) Management Menu for specific failures and attempt a rebuild (assuming you have a redundant RAID Volume).
\015\012
\015\012You can also speak with Dell Support and raise a warranty call if the system has warranty.
\015\012
\015\012Note: PowerEdge 840 would ship with PERC or SAS Controller. PowerEdge 700 will ship with PERC or CERC.
\015\012
\015\012Mike
Repair Help & Product Troubleshooting for Dell PowerEdge 700 Server

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Constant beep on poweredge 840 appears to work alright


Hi\015\012\015\012Besides standard beeps codes indicating Processor, CPU, Memory or Systemboard failures, \015\012Dell PERC (PowerEdge Expandable Raid Controller) or SAS Controllers (Serial Attached SCSI) generate beeps to alert fai ... Dell PowerEdge 700 Server

Pc won't boot


You can check on other HDD if your problem solved means your HDD damage if your problem not solved check your HDD jumper setting then your problem not solved change or repair your motherboard and cpu ... Dell OptiPlex GX270 PC Desktop

Dell Inspiron 531 (desktop) won?t turn on/boot


You've either got a bad motherboard or a bad processor (I'd lean to the motherboard being bad). I would honestly take this into a computer repair shop and have them check both. ... Dell PC Desktops

Shut Down Problem & Have to Reset Computer Battery


Hi, I had the same problem, for a workaround this is what I did. I made a new shutdown shortcut. Now when I click on it the pc shutsdown fine. I actually put mine on the taskbar. Here's how I did it...\015\012\015\012XP Users: ... Dell Dimension™ B110 PC Desktop

Compaq Presario CQ50 Labtop, makes awful constant beeps


If you shut it down when WinFlash was running, then bad news - BIOS corrupted. This means faulty motherboard. Solution - replace motherboard. ... Acer TravelMate 2480 Notebook

No display lights


Run the PSA Diagnostics and Obtain the PSA Error Code \015\012To run the PSA diagnostics and obtain the PSA error code, perform the following steps:\015\012Shutdown the computer.\015\012Press and hold the <Fn> key, ... Dell Inspiron 9100 Notebook

Cannot get new Motherboard to boot up in Normal Mode


What u may have done is wwhen u were installing the new board, gave a static shock to the system...that will cause only the fans to come on and nothing more...this is a bad problem bc u cannot fix it...if u figure out something else is wrong, and it ... Gateway PC Desktops

Won't boot up


Hi..This is an Hardware Failures: Doesn't Boot Up.First of all, most of the\015\012hardware failures that are going to be presented in this article\015\012require you to disassemble the l ... HP PC Laptops

Failure to startup-Loud constant beep


The good thing is, the system should be under warranty (If you bought it new) so here are some things to try:\015\012\015\012\015\012remove battery and hard drive, power on system and see if you can enter BIOS and if the beeping ... PC Laptops

I get a 1-3-3-1 error code beep on Toshiba Satellite M35x-S109


Well it sounds to me like it is your actual install, I suggest you that you do a factory restore, \015\012Toshiba laptops from mid 2007 onwards dont have a recovery disc supplied with a purchase of a laptop. Instead, Toshiba has added a ... Toshiba Satellite M35X-S109 Notebook

DVI output problems with Acer Veriton M464


If you are comfortable with opening the case, you can try this: Unplug the power supply, make sure are constantly grounded (touching metal)remove add-in video card. Locate the "Clear CMOS" jumper (usually 3 pins in a row with two shorted via a plas ... Acer PC Desktops

No Video Signal on 1600sc


I also have this problem with my Dell Poweredge 1650, integrated Ati Rage XL doesn't work. But when I add PCI graphic card, I get the video from it. Could integrated video be somehow disabled? ... Dell PowerEdge 1600SC Server

No video on boot up!!


Have you tried to uninstall the vedio driver and reinstall it then let me know.go to my computer icon right click it > go to properties >hardware tab > device manager and check if there is any yellow mark showing.kindly do this in starting your compu ... Gateway 500XL PC Desktop

I can re boot boot my compaq persario V6000


Only a HDD with a properly installed OS, a valid boot sector and an active partition will 'Boot' Did\015\012it ever work? Are you sure the POWER is there. Are you sure the cables\015\012are on right and the HDD is identified in the BIOS o ... HP Compaq Presario V6000T PC Notebook

Will Dell optiplex P4 1.8Ghz CPU work on Dell dim8400 LGA 775 MB?


Yes you can try checking the processor ... Dell Dimension 8400 PC Desktop

Setting tax Somehow my tax has reset itself to 0% but i need to set it back to 17.5% for VAT purposes. Its an old model and i can't find the instruction manual. Has anyone got any ideas? its a Sharp Elsi Mate EL-2125 calculator Thanks


If the model is EL-2125 , and not 2125C or 2125E the following will work\015\012\015\0121)switch on\015\0122)press CE and then CA (you should see 0. with small 00 in top left hand corner but nothing else)\015\0123)press M- but ... Hanns.G Corporation HW191D 19" LCD Monitor

I have a red vertical line on my dell inspiron laptop.How do I remove it?,please


Try connecting an external monitor to the Dell Inspiron 9300and see if the vertical line is also present on the monitor. If themonitor display is fine, then your laptop’s LCD display panel isdefective. If the monitor also displays the ver ... Dell PC Laptops

Turn power on fan working No Picture, what can I


Hello Ronnie,\015\012Thank you for using Fixya's services. I have a couple of questions and some troubleshooting tips for you:Questions: Is the splash screen coming on at all? Any picture or text right ... Acer Aspire One PC Notebook

Pavilion dv6600 dimmed lcd monitor


You could have a faulty inverter or a CCFL lamp, To determine if you have a LCD screen, inverter or video card problem, read this and follow these instructions. Defective CCFL backlight, it may have the following symptom: Screen flashs on red/p ... HP PC Laptops

When turned on all i get is fans constantly running and nothing else was working fine up till then


Sometimes the best answers are the simplest. First, make sure the video monitor is switched ON, securely connected to the computer video port and the "brightness" control set to at least mid-point. Before focusing suspicion on the computer itself, tr ... IBM ThinkCentre S50 8183 - P4 3 GHz (8183D9U) PC Desktop

Dell Poweredge 4300 Bootup problem after cmos battery replacement


Check the version for the Raid Controller. This may need to have the firmware to be upgraded. If the controller is removable, take the controller out and then see if the computer will continue past the bios. If the controller is built-in, then disabl ... PC Desktops

Emergency Room: Code Blue


If its a very old game then it might still run on dos. dos is the old operating system. you could run two opperating sytems if you want to do that then read this that i found on runing two opperating sytems\015\012\015\012First you need t ... Legacy Interactive Emergency Room: Code Blue for Windows

Stuck on BIOS Screen?


I would try to power off the machine completely and hold a key down on the keyboard and power on the computer while still holding down one key. Keep holding it (it might make an irritating beep sound, that is expected) . This is one trick that will a ... E-Machines eMachines Desktop PC

Beeping PowerEdge 1300


When a Dell server beeps in every 3-5 second that mean it comes from Raid controller.Dell calls PERC Controller.It usually reason of a disk failure.Install open manage server administrator on your server.See which disks ... Dell PowerEdge 1300 Server

Keyboard doesn't work properly


Turn on your computer, go to the control panel, if you are using Windows XP, click on switch to classic control panel" and then go to Accessibility Options. There is a keyboard tab that the settings can be changed to help people with disabilities ope ... E-Machines eMachines Desktop PC
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7231 seconds