Having problems with your E-Machines eMachines Desktop PC ?
Emachines 180 desktop sound problems
\015 Hi I have an emachines 180 desktop which works brillantly the only downfall is I installed the right sound drivers advance ac97 and I try and plug the speakers in and the music is playing but I can't hear it through the speaker. Can anyone help? And yes,before anyone asks the volume is turned right up.\015
Answers :
\015\012Plug in ONLY the regular wired speakers and ONLY to the green port on the back.
Make sure they are powered up and the volume is about half way.
Ok now you need to call up ether the sound card application or preferably the windows volume control from the bottom toolbar.
Click Open Volume Control.
\015\012
A box with sliders in should appear. make sure that volume control, wave, sw synth, aux, cd player, line in
are all about half way and that none of them have ticks in the box at the bottom.
If any of those are missing click options then properties from the top left and put a tick besides any that were missing (nothing else)
Now close the slider box.
Put a normal music cd in your cd/dvd player on the computer and set it to play with windows media player.
You should now have sound out of the speakers.
Double check that EVERYTHING is ok.
\015\012If there is still no sound check the control panle for any hardware issues and rectify those
Make sure they are powered up and the volume is about half way.
Ok now you need to call up ether the sound card application or preferably the windows volume control from the bottom toolbar.
Click Open Volume Control.
\015\012
A box with sliders in should appear. make sure that volume control, wave, sw synth, aux, cd player, line in
are all about half way and that none of them have ticks in the box at the bottom.
If any of those are missing click options then properties from the top left and put a tick besides any that were missing (nothing else)
Now close the slider box.
Put a normal music cd in your cd/dvd player on the computer and set it to play with windows media player.
You should now have sound out of the speakers.
Double check that EVERYTHING is ok.
\015\012If there is still no sound check the control panle for any hardware issues and rectify those
Many of the modern sound cards have multiple ports for connection have you plugedin to the Green colour coded port this should be the one that corresponds to the sound.
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC
Tips for a great answer:
- Provide details, support with references or personal experience .- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
My desktop computer won't connect to the Internet
HI there,eDriverDownload.com helps you find Emachines drivers for your devices. Emachines T2698, T2778 Driver is a property of its respective aut ... E-Machines eMachines Desktop PC
Beeping emachine desktop won't turn on
Hi shyguy, Before I address your issue, I figured you ought to know: Buying an emachine is one of the worst moves a consumer can make. Why? because despite the fact that they are cheap, they frequently have problems, which can ... E-Machines eMachines Desktop PC
EMachine will not turn on.
Sounds like the power supply is faulty. Power supplies are very dangerous to try and repair, even for qualified technicians. I would also suggest not trying to plug it in or turn it on until the new power supply is in place. Faulty power supplies ... E-Machines eMachines Desktop PC
My Samsung LCD TV/Computer Monitor just went deadOnly 14pins/15
It sounds to me like the monitor/TV needs to either be replaced or sent in for repair but there are a few things we can test. \015\012\015\012The first thing would be to set the TV to connect a cable line to the TV and see if you can get ... Samsung SyncMaster 204B 20.1" LCD Monitor
Emachines 180 desktop sound problems
\015\012Plug in ONLY the regular wired speakers and ONLY to the green port on the back.Make sure they are powered up and the volume is about half way.Ok now you need to call up ether the sound card application or prefera ... E-Machines eMachines Desktop PC
Pc won't boot
You can check on other HDD if your problem solved means your HDD damage if your problem not solved check your HDD jumper setting then your problem not solved change or repair your motherboard and cpu ... Dell OptiPlex GX270 PC Desktop
Drivers Emach T5230
I solved this problem completely later that day.\015\012Here's how:\015\012\015\012From the Emachines site I downloaded and installed the file:\015\012RealTek_Audio_5_10_0_5152. \015\012\015\012This dirver is for v ... Microsoft FREE Sidewinder Gamepad Pro-Retail (MSC1800018PRO)
WMP/Spotify doesn't work properly
If you are using the PC's motherboard sound I would upgrade to a soundcard. they are relatively inexpensive and easy to install. www.pricewatch.com ... PC Desktops
The sound has quit - E-Machines eMachines Desktop PC
If u not solve u problem according solution type on run 'control"then click sound and audio then adjust setting. then if not solve your problem keep sound card on board to check your sound chep of bord damage or not? ... E-Machines eMachines Desktop PC
Not able to install windows xp
Check the power supply. The voltages should be +12 V yellow, -12 V blue, +3.3 orange, -5 V White, + 5 V red. If the numbers are extremely low or high, you have a problem.\015\012\015\012If on the 12 V wire, you have a voltage difference ... PC Desktops
Don't know how to reformat my emachine T5010 desktop PC
Reformatting your Windows computer is usually the absolute last resort and is often done unnecessarily. Before you go through the process of doing a reformat of your hard drive please take a few moments to read through the rest of our w ... E-Machines eMachines Desktop PC
Secondary drive 0 not found
Hi there.Sounds like the boot order has been changed in the bios.The secondary drive sounds like the CD drive as most laptops only come with 1 HDD installed.Change the boot order to the primary drive by Pressing F1 during sta ... IBM ThinkPad T20 2647 Notebook
Emachine destop not recognising acer lcd monitor
It sounds more like the computer isn't starting up. The "no signal" message is coming from the monitor itself to tell you it's on but there's nothing coming in to display. Normally no special drivers are required for the monitor, and you'd see at lea ... Microtek C593 15" Flat Panel LCD Monitor
I have problem with sound for my desktop computer. My emachines model T5212 ans serial GRD6b100-03254
If any major problem use a pci sound card it just cost 250rs other wise you can try to reinstall it. ... E-Machines eMachines Desktop PC
The beeping sound of the emachine desktop T3414 makes a long beeping sound for 4 seconds flat and pauses for 2 seconds and repeats the process. Hope this is a broader explanation of the problem. Thanks.
Open cpu cabinet.Then refix RAM memory.Pull processor fan and then processor remove dust from all parts and circuit.Reattach both processor and its fan.then check if still face same issue.Then pull cmos cell from motherb ... E-Machines eMachines Desktop PC
I can't get my sound to work - E-Machines eMachines Desktop PC
The first thing to check are the speaker plugs. Depending on the options of your tower there could be up to six different plugs on the back of the tower. Usually the green colored plug is for audio out. Also check all the connections on the speakers ... E-Machines eMachines Desktop PC
Sound software was deleated. Do you know of anything I can d/l?
You have to download sound driver for this. ... E-Machines eMachines W2686 PC Desktop
No sound after windows download - E-Machines PC Desktops
Did you install the sound drivers. If you do not have the disk, they have them on the E-machine site.Here are some things that you can try.\015\012\015\012\015\012\015\012\015\012\015\012 \015\012 Normal\015\012 0\015\012 \015\0 ... E-Machines PC Desktops
This sounds very funny but the problem is I cannot get my desktop
The problem is due to explorer being corrupted or not loaded for some reason.\015\012To solve press ctrl alt delete and bring up task manager and then goto file menu then new task and then type explorer and hit ok. If this loads your desktop up ... Acer Aspire 5610-4648 Notebook
My hp desktop computer will not turn on
If you cant see or heard any boot up sounds, fans and especially if you dont see any power or green led lights at all ;If your power cord is plugged into a power strip or surge protector, power cycle your strip or surge protector by turni ... E-Machines eMachines Desktop PC
My W3410 eMachine desktop won't Boot at all!!!!!!
Sounds like a harddisk failure unfortunately. You might want to boot your original OS disc and perform a repair (non-destructive), this may either confirm an HD crash or fix the problem. ... E-Machines W3410 PC Desktop
Emachine and Brother MFC 440cn compatibility
It sounds to me that you need compatible hardware to solve this problem. A friend of mine had older technology and he had a brother laser printer. Once the motherboard he was using was replaced with a socket 775 all worked well. ... E-Machines eMachines Desktop PC
Problem with the sound - E-Machines eMachines Desktop PC
Plz reinstall your sound driver then check. ... E-Machines eMachines Desktop PC
It starts to do a sound like peeeeep - E-Machines eMachines Desktop PC
There is hardware problem, it is very possible that your RAM is out of order or change your RAM into another slot.\015\012Secondly the chance is your processor creats problem.\015\012Thank You ... E-Machines eMachines Desktop PC
I HAVE EMACHINE MODEL t3410
This is an easy fix . Go to The web site for REALTEKAC97 AUDIO and down load audio drivers foryou E-Machine T3410 with the approaite os (windows XP HOME) . After restarting your desktop all will be good. I had the same problem , this is the easiest a ... Computer Monitors