Having problems with your E-Machines eMachines Desktop PC ?

I just bought the eMachine ET1831-07. I plugged

\015 I just bought the eMachine ET1831-07. I plugged in the same speakers that I had on my last computer and the audio does not work. I then grabbed the pair of speakers from another computer, checking to see if they worked first, and I have the same issue... No sound! Anyone else have this?\015

Answers :

Hi

Thank you for your query

The sound issue could be down to several issues

Please try the following

1) Ensure that the speakers are plugged into the right port the port at the back of the Pc will be a light green colour and on closer inspection will have this symbol >))

2) If it is in the right port click on the following Start>Control Panel>Sounds and Audio Devices. In here ensure that the volume is not muted

I believe 1 of these 2 should cure the problem

If this has been useful please leave positive feedback/vote/testimonial - Thank you again

Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I just bought the eMachine ET1831-07. I plugged


HiThank you for your queryThe sound issue could be down to several issuesPlease try the following1) Ensure that the speakers are plugged into the right port the port at the back of the Pc will be a lig ... E-Machines eMachines Desktop PC

I have a T2958 and toof the face off. Can you


EMachines doesn't give out this kind of info, and I don't have one in the shop. eMachines also had the habit, of using a few different manufacturer's of motherboards. Intel, TriGem, MSI, Asus,and FIC to name five. Plus eMachines wou ... E-Machines (T2958) PC Desktop

Emachine Won't power up


Just because it has a SATA plug doesn't mean you'll need it- especially if your machines a few years old. If your hard drive doesn't have the sata connections, then you probably won't use it. \015\012 As to why it still won't power up- how did ... E-Machines eMachines Desktop PC

Emachine beeps Hey, we just got a new emachine and we have the same problem! We got it mid/end of April but were in the process of moving so it stayed in the box till about a week ago. I hooked it up and when you press the on button it beeps 5 times then you hear the fan kick on like its thinking about starting up but then it just stops and beeps until you turn it off. The monitor says no signal and then goes blank. Any advise?


That would be a problem for e-machine. The beeps are codes. I will try to help, but it is hard to diagnose without looking at it.You can try several things. Open it up and make sure that everything is seated inside. Make sure the memo ... PC Desktops

Emcahine Monitor sound is low


Check the speak rail, the emachine speakers need a amplifier, there should have a power supply plug, that you need to plug it in. \015\012if not, call up the place you brought the machine and ask them, where is the amplifier plug. ... E-Machines eMachines Monitor E15T4

I want to expand my memory, so I went to Fry's with my computer model number and bought a 1Gig memory card, brought it home and the pin configuration doesn't match. The one I bought has two rows of pi


Go to http:\\\\www.pby.com and look at the memory configurator. You will be asked about your system (make and model). They will then advise you of the specific part number for your memory. Keep in mind, you should never expand upon existing memory ... E-Machines eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop

Emachines shuts down by itself all the time


There are a lot of problems with Emachines as far as motherboards go. Since you've already replaced the power supply, it's safe to say that it's not causing your issue.Since you seem comfortable with the inside of your machine, go ahead a ... E-Machines eMachines Desktop PC

Emachines problem... PSU works but comp doesnt turn on


Hi,\015\012I don't want to tell you a color because it could be different than the actual. Look at the front of the computer and trace the wire that goes to the switch and follow it to the mother board. If you have a volt meter you could measure the ... E-Machines eMachines Desktop PC

Emachines desktop Wont boot. - E-Machines eMachines Desktop PC


A simple and effective task (well most of the time) is to reseat components on the motherboard. This can include unplugging the components, including but not limited to:Hard Drive and Optical Drive CablesIDE/SATA ConnectorsSys ... E-Machines eMachines Desktop PC

Reconnecting power swith, LED light for power and hard drives on emachine


Yes that is true if you look at your wires ahnd you will see that one says hdd and one says spkr and so on now look closley at the board and you will see the same thing on the moboard if you are not abloe to read it you should be able to go ... E-Machines eMachines Desktop PC

Emachines W2888 not turning on


Easy fix! Sounds like you bought a bad Power supply. Purchase an identical p.supply and it will run like a car! ... E-Machines eMachines Desktop PC

My emachines wont turn on


Also in addition to the above, try reseating the ram chips..take them out individually and plug them back into their respective slots..might be the miracle cure..If the motherboard fan turns on, it might just be bad memory..replace RAM chips ... E-Machines eMachines Desktop PC

Making my emachines D620 wireless


When you installed the driver for the usb did you select your usb device model ? some drivers are written for usb devices AND for wireless cards (=pcmcia) and at the begining of the instalation they ask: please tell me do you have usb or pcmcia ? or ... eMachines eMD620-5133 Notebook

My computer w2686 do not start


I'm assuming that when you say "unplugged" that are you are meaning to say that you're unplugging the IDE ribbon but still leaving the power plugged in to the device.Try resetting your CMOS settings by using the jumper on the motherboard. ... E-Machines eMachines W2686 PC Desktop

I have an encore wireless USB adapter that won't work.


Hi did the usb adaptor come with software or not also have you tried letting you computer scan for hardware devices.As its usb it should be plug and playIs the adaptor for sending data from things like phone etc via bluetooth they are usu ... E-Machines eMachines Desktop PC

No dial tone being recognized.


Try downloading updated drivers for your modem and...please make sure the phone cord is plugged into the line side and not the side with the pic of a phone on the modem. ... eMachines W5243 Refurbished AMD Desktop Computer - AMD Athlon 64 3800+ 2.4GHz , 1GB DDR2, 250GB

The Monitor Will Not stop saying emachine


You may have a failed motherboard or a failing/failed power supply unit (PSU) then. Failure of motherboards is usually due to breaking capacitors. A few years ago a capacitor company stole the "recipe" for making capacitors from another company ... E-Machines etower 466id PC Desktop

EMachine T3958 Won't start - Please help


The green LED indicates that the standby voltage is present which is what provides the power so the front button can tell the unit to turn on fully.\015\012At that point, there are 3 possibilities; the power supply has a fault and won't turn on ... E-Machines eMachines Desktop PC

Cannot open hotmail emails


Download firefox here install and then goto your hotmail account.if it works you have a IE plug in problem ... E-Machines eMachines Desktop PC

My keyboard keeps malfunctioning on my Emachine, it will work for a little while and then quit (usually after 10-15 minutes). I unplug and then plug it back in and that does not solve anything. I even went out and bought a new keyboard and has not changed anything. Thanks in advance for any help!


Try using an USB type Keyboard. the PS2 on the board can get faulty with time. ... PC Desktops

I have checked everything, cable connections, device manager, sound settings etc, I even bought new speakers but still have no sound at all. I have ran some scans and it says my drivers need updating but I cannot find the software cd rom from microsoft to update them and I also can't afford to pay out for a new disk! Please help?


EMachines maintains a pretty comprehensive support site where you can get updated drivers that may be modified to work with their systems and your operating system.\015\012\015\012Another alternative is to download Belarc Advisor (free) and it ... E-Machines eMachines Desktop PC

Foolish Move Well I was in safe mode, and in system restore and it was taking forever to go back to restore, so I got frustrated and pulled the plug and lost everything on my Emachine W3502 that I've had for a couple of years. I got Windows XP back on but their is a lot of stuff missing that came with the computer when I bought it. The video games I used to play are not working. I was wondering if their was any free software out their, that I can download. I sure would appreciate your help if y


You probably scrambled some files and will lose something. Great that XP works.Try this:- Start- Run- Type in the following exactly (not the quotes)"chkdsk c:/f"- it will ask you a question. Answer is:ythen ... E-Machines eMachines Desktop PC

New laptop lcd display not working


Check all usb connections i just fixed a emachine that seemed to boot up but no display would show lcd or ext. so i got to looking and one off the usb ports was broke and bent downt into the opening and shorting out when i removed it and turned back ... Gateway MT6451 Notebook

On my emachines m2105, the cd/dvd drive no longer reads or recognizes there is a disc in the tray. We have done all the updates necessary and its still not working. We bought an external hard drive to use and it wont even recognize it when its plugged into the usb. any suggestions??


If you have the techie to dissassemble the cd/dvd drive, unplug and reconnect the cables connected to the dvd. or the cmos setup is disable for these drives. ... E-Machines M2105 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3881 seconds