Having problems with your E-Machines eMachines Desktop PC ?

Still having trouble with EMachines T3882

\015 Man, I am about ready to throw this thing out the window....\015\012\015\012OK, I tried all three boot up scenerios - none of them worked. The monitor is now acting crazy. When I turn the monitor on, it shows a tri-colored square (red, blue, green) on a black background The red third reads "Monitor Selft Test", the blue reads "Your monitor is working correctly, the green says "check computer power and monitor cable". This square keeps scrolling up and down a couple of times and then the monitor goes into the power safeing mode. No key stroke or mouse movement brings it back.\015\012\015\012No longer getting Windows/EMachines logo so does this mean the computer is not trying to come up in Windows anymore?\015\012\015\012The monitor is EMachines 17f3.\015

Answers :

I feel your pain. I finally moved my pc to a room with no windows! But seriously, try a different monitor first. See if you can borrow someone's to just try it before you do anything else. If that borrowed monitor works fine, then you know what the problem is. (Which I believe is the problem.) By the way, what started all of your problems?
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Still having trouble with EMachines T3882


I feel your pain. I finally moved my pc to a room with no windows! But seriously, try a different monitor first. See if you can borrow someone's to just try it before you do anything else. If that borrowed monitor works fine, then you know what the p ... E-Machines eMachines Desktop PC

My desktop computer won't connect to the Internet


HI there,eDriverDownload.com helps you find Emachines drivers for your devices. Emachines T2698, T2778 Driver is a property of its respective aut ... E-Machines eMachines Desktop PC

No power on my emachine


The power supply might be okay but the system board could be bad and not turning the power supply on when you press the power button.On this page:http://www.helpwithpcs.com/courses/power-supply-basics-inc-pinouts.htmabout midw ... E-Machines eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop

My emachine freezes after it boots up. I had


I must say at the front that you seem to have the machine looked at professionally and received advice. They couldn't fix it ... I'm not sure I can build on that diagonosis. I do have a few ideas, however. This is a case where the messenger is tel ... E-Machines eMachines Desktop PC

I cannot find my recovery /reinstallation disc for emachine 5260


DO NOT click on that Format option. It will wipe the entire recovery partition.\015\012\015\012First look at all your programs to see if there is a recovery program. (Not System Restore.) It would probably be located in Start>All Progr ... E-Machines eMachines Desktop PC

Emachines T3882 desktop w/one cd-dvd combo drive[no floppy]


Hi, now the screen is blank[black]with a blinking cursor and will not accept any commands. No words or error messages, only a blinking cursor. I tried different CD's; Window XP, Hiren's, Maxtor MaxBlast, Ultimate Cd, and it stays on the blinking curs ... E-Machines eMachines Desktop PC

HAVING TROUBLE WITH CD DRIVE ON WINDOWS XP EMACHINES COMPUTER. SKIPPING AND DISORTED SOUNDS WHILE PLAYING A CD AND MUSIC OR SOUND THAT ALREADY ON THE COMPUTER. HAVR TRIED PURCHASING ANEW CD DRIVE AND PROBLEM STILL PERSIST


It's not your cd-rom but more likely your speakers. Borrow or swap your current speakers that you know work & sound good.\015\012If they sound good on your system. You need new speakers. If the sound is still disorted. Than you ... PC Desktops

The sound on my eMachine T3882 computer just stopped working. I have tried the problem solver, but nothing works. Help!


Be specific, what do you mean by just stop. The power shut off, or it frooze, or the mouse froozen. But try to do this first. Try to remove or unplug the power chords from the power supply of your PC. Leave it in 5min. off. Put it back and try to tur ... E-Machines T3882 PC Desktop

Emachines 3090 keyboard


Check in here: http://www.google.com/products?q=250gb+2.5+sata+hard+drive& ... PC Laptops

Installation windows xp emachine t5082


You must find "eMachine" XP USB drivers for your computer.\015\012If all USB support is "enabled" in BIOS, the conflict is with drivers.\015\012XP is loaded with many generic drivers, however eMachines is proprietary and requires eMachine ... E-Machines T5082 PC Desktop

I need emachine etower 600is intel processor - E-Machines etower 600is PC Desktop


The eMachines eTower 600is uses an Intel Celeron III processor that operates at a maximum frequency rate of 600MegaHertz. (600MHz) ... E-Machines etower 600is PC Desktop

Emachines shuts down by itself all the time


There are a lot of problems with Emachines as far as motherboards go. Since you've already replaced the power supply, it's safe to say that it's not causing your issue.Since you seem comfortable with the inside of your machine, go ahead a ... E-Machines eMachines Desktop PC

Not turning on, has power and everything


Do any of the fans spin at all, as though it's attempting to boot up? If not, then double check your power supply to see if it has a switch on it and if it does then make sure it's switched into the ON position. If so, then I would recheck the power ... eMachines T3604 PC Desktop

Emachines monitor goes black while CPU is still working


... E-Machines eMachines Monitor E15T4

Emachines e4026 non-responsive


I don't think it's an overheating CPU. It would stay on for a bit longer if it was that.\015\012\015\012My best guess is a power supply issue. Either your power supply is bad, or more likely something is pulling too much power from it. Emachines a ... E-Machines eMachines Desktop PC

Emachine D620. After system restored, password-original factory


Install fresh copy of xp on different location of pc and extract files from ealier installed xp ... eMachines eMD620-5133 Notebook

EMachines E19T6W monitor turns itself off and on.


First off, I would check the monitor, if it is getting very warm, I would use a can of compressed air to blow the dust out (make sure it is unplugged first!). Second, I would check for any sort of interference in the vicinity (speakers are a huge cau ... Computer Monitors

Windows doesn't recognize recovery partition after os reinstall


The issue you are having involves using multiple systems,...If your emachine came with vistan and you installed xp, you voided your warranty status...However remove your dual boot and stick to vista if you wanna keep your restore partition working pr ... E-Machines eMachines Desktop PC

Emachine heating issues


Hi rebecca_fran, \015\012 Well the system is shutting down for a reason but before you run off & buy a new CPU fan I want you to try something.\015\012Unplug the power cord from the PC. Open your ca ... E-Machines (BFB0505HA) Cooling Fan, Laptop Heatsink, Heatsink With Fan

EMachine stopped displaying video (card not working, just mobo)


Hi there\015\012\015\012I would say it's the graphics card that's failed. You might get the same beeps for faulty card as removed card....\015\012\015\012Take it to a shop where they can test a compatible card, before they se ... E-Machines eMachines Desktop PC

Emachines w3609 My emachine w3609 was working fine one night and when I turned it on the next morning, it would turn on but my monitor said no signal and it wouldn't do anything. I got online with tech support and they said to reseat the ram, which I did, still no go. Then they said I would have to buy new memory which I did, a kit of 2 x 1 GB of ram. I put it in and still nothing for a total of 12 times. Then they told me my motherboard ram slots were dead, and I would have to get a new motherb


Hey iluvyakatu\015\012\015\012 Does your emachine has inbuild video card or AGP or PCI card? if one it has AGP or PCI card try to reseat it. If it is inbuild try to use AGP card or PCI card and see what happen. Also try to check whether ... E-Machines eMachines Desktop PC

Emachine laptop D620: reset password after system restored


Insert OS cd in drive and start reinstalling by selecting repair mode\015\012now once all files are loaded system will reboot when you see the Installing Devices progress bar, press SHIFT + F10this will give you access to your acc ... eMachines M6811 Notebook

When startup button is pressed fan runs and orange LED comes on for a second and then stops (have changed motherboard and tested with different PSU still not working).


Hello!\015\012\015\012Try only motherboard, ram and CPU, without keyboard, mouse, grafik card, hard disk, cd or dvd rom. If you have one normal beep, you have trouble with some of another parts.\015\012\015\012If you still hav ... Dell Dimension E521 PC Desktop

My eMachines T3882 with Windows XP just reboots over and over


If it will start in safe mode, try running your anti virus to find a virus.If it wont start in safe mode, try making bootable USB with a standalone virus checker.Seehttp://support.kaspersky.com/faq/?qid=208282173Kaspersky make ... E-Machines eMachines Desktop PC

EMachine W3623 Vista not accepting router


Agreed with the above Vista does **** and there are routers and other equipment thats not compatible with Vista, if this is the case then You must download updated drivers from the Netgear Site, they update drivers on occasion but not so much since W ... E-Machines eMachines Desktop PC
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3347 seconds