Having problems with your E-Machines eMachines Desktop PC ?

Emachines desktop Wont boot. - E-Machines eMachines Desktop PC


Answers :

A simple and effective task (well most of the time) is to reseat components on the motherboard. This can include unplugging the components, including but not limited to:

Hard Drive and Optical Drive Cables
IDE/SATA Connectors
System Ram
AGP / PCI / PCI-E add in cards

Note - Never mess with the processor unless you feel qualified to do so.

If after reseating all the components, the computer still does not boot, try setting in your BIOS to start up from the CDROM and insert your recovery disc into the drive and see if the recovery detects the drive. If it does, its most likely the boot header in the file system has gone kaput. You could attempt a re-installation of Windows by choosing the repair option, however, this is a last resort thing, and if you cannot do this either, then you might be in the market for a new computer.

When a new computer is bought, you might want to buy an external USB Powered enclosure for your hard drive so you can plug it into the new tower and recover all of your documents.

I know how the failing computer feeling feels like........ So good luck!
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Emachines desktop Wont boot. - E-Machines eMachines Desktop PC


A simple and effective task (well most of the time) is to reseat components on the motherboard. This can include unplugging the components, including but not limited to:Hard Drive and Optical Drive CablesIDE/SATA ConnectorsSys ... E-Machines eMachines Desktop PC

Sony Vaio desktop will not load windows


What your describing is a hard disk failure the computer cant or wont read the hard disk to boot the machine, so it shuts down. Sounds like the hard disk died from a bad virus. and the computer wont run. Best I can do for you is either format the Ha ... Sony VAIO PCV-RS720G (027242658103) PC Desktop

COMPUTER PROBLEMS when i switch my computer on, a get a blue screen with errors. its telling me to make sure new software or hardware is installed properly but we havent recentley installed anything. i cant get that screen to go,its like its frozen and wont let me do anything(im using a different 1 at present).we have tried restarting it and it does exactly the same thing.please help ??????


Hello,What you are seeing is the infamous Blue Screen of Death (BSOD)When you power on your machine start taping the F8 key. You may get a boot from screen with your hard drive listed, CDROM, etc.Press ESC to continue and pres ... Dell OptiPlex GX620 PC Desktop

Emachines t3958, bad ram, green stand-by only no boot


Are you saying you bought 2 more machines to fix the problem? I don't understand. Do you have the manual for the machine. How long did your system run before a Ram stick went bad? What brand and size are your Ram sticks. Are they identicle? As far as ... E-Machines eMachines Desktop PC

My eMachines T3882 with Windows XP just reboots over and over


If it will start in safe mode, try running your anti virus to find a virus.If it wont start in safe mode, try making bootable USB with a standalone virus checker.Seehttp://support.kaspersky.com/faq/?qid=208282173Kaspersky make ... E-Machines eMachines Desktop PC

Emachine has error system32lsass.exe'1073741819


You can try booting in safe mode (Press F8 after the initial beep, but before your PC tries to boot into windows.) then run a virus scan, which may fix everything for you.\015\012Even if you can't boot into Windows, your data is most likely sti ... E-Machines eMachines Desktop PC

Hi, today my computer gave me the blue screen with errors, and when i try to boot from cd it says device not available and it wont let me formatt my partition, as i managed to boot from cd once and again when it was loading the disk i got the blue screen with errors again, what could be my problem and how can it be fixed? thank you


1st solution...\015\012remove all power / power cables then keep pressing the power on button on the PC, ON - OFF, repetedly for some time WITHOUT POWER...put back the power cables...switch on....does it work ?\015\012else\015\012do ... Dell Dimension 9200 PC Desktop

Giving me messages about hardware failure and disk failure and telling me my hard drive isnt attached... getting the blue screen saying dumping physical memory then it tries to restart but wont boot all the way.


1st solution...remove all power / power cables / batteries then keep pressing the power on button on the PC, ON - OFF, repetedly for some time WITHOUT POWER...put back the power cables...switch on....does it work ?elsedo this.... ... Compaq Evo N610C Notebook

REBOOT LOOP -EMACHINE T5026


You have provided some good information, but more detail is needed.Is the system still under warranty? How long ago did this start? Have you added any new hardware or software?Your reboot issue might not be hard drive or MBR ... E-Machines eMachines Desktop PC

T2893 e machines wont turn on


Since you are looking inside, try this. Trace the wires that come from the power switch back to the Motherboard. The wires from the switch will connect to two pins on the motherboard. Carefully jump those two pins with a screwdriver and the machin ... E-Machines (T2824) PC Desktop

EMACHINES PROBLEM. IT WONT START UP HELP IMMEDIATELY!


That's great, since you need it for work I'll charge you my going rate, OK?     The simplest way of curing this is to put your machine's drive in a USB enclosure so you can use a working machine's antivirus/anti-spyware on it, an ... E-Machines eMachines Desktop PC

I have an Acer Aspire M1641 desktop machine running Vista. Had a power failure, now machine wont boot. Switch on, Hard Drive spins,but no dos or any other messages come up. the curser arrow, comes up on a black screen only, Tried to run my restore disc that came with machine, but no change. Help! Any ideas please.


Your machine has a hardware problem. Open the case and blow all the dust from it. Reseat all components you can. If that does not help, remove memory and try using one memory stick at a time. Change the memory slot. If it still will not boot you ... E-Machines eMachines Desktop PC

LCD monitor signs "no signal" on eMachines t3418


E-machines had had a long history of bad power supplies. I've seen many of these machines go bad and when they do they take out the video chip (Nvidea) with it, usually shutting down the whole machine. I've never seen one operable. You might be ab ... E-Machines eMachines Monitor E15T4

Emachines T2698? This is my sisters computer and she ahs had it for sometime not really sure how long but just this past weekend the computer was running real slow and her father in-law went ahead and did a system restore. She told me that when they got done with the restore everything worked better. She also has a Emachines laptop that is acting up and so she went to try her desktop computer. She pushed the power button and it came on but it stops at a big E on the screen and you can't do anyti


Hi,\015\012\015\012On the e-Machine desktop, go to the CMOS/BIOS set-up and set everything to default or fail-safe settings. Save and Exit. Verify also that the desktop auto detected the hard disk.\015\012\015\012If the unit will still not boot to th ... E-Machines eMachines Desktop PC

Emachine trouble The emachine desktop that i have is currently haveing problems loading Windows XP. This is the operating system that came with the compuer. However everytime I turn the computer on it starts to boot fine until I get to the page that says (Windows IS Now Loading) and then ti freezes up and will not go any further. I have tried to restart it sveral times and even ran system test but no problems are acknowledged. Could you please assist me with this problem at your earliest canvien


There are several causes that are common.The first,especially with e-machines, is they do not like service pack 2 updates.If you have a standard winxp cd you can boot from that and choose repair console once the cd starts to load win xp f ... E-Machines eMachines Desktop PC

I have a Emachine W3650 And it wont start up


Insert your windows cd and set computer to start from cd. When prompted to, hit a key to boot from CD. Let Windows start the install (relax it is not really installing anything) when it gets to the prompt, tell it you want to Repair an existing ... E-Machines eMachines Desktop PC

Reformatting E-machine desktop computer W3115


Insert the CD to the CD ROM. Set the bios setup to boot using the CD-Rom. Space bar while booting up. If you got the setup press F8, choose NTFS to format the drive. Then go on with the Installation. ... E-Machines eMachines Desktop PC

Emachine t3302 cleanup of many infected files


Well there are a lot of ifs ands or buts. Every infected system should have important files backed up and then the operating system reinstalled. Holes have been punched in the security and may only lead to immediate reinfection. You don't know what p ... E-Machines eMachines Desktop PC

Emachine wont start up


This is a DESKTOP machine, not a laptop. It has to be plugged into a wall outlet that has power, for the machine to run. ... E-Machines eMachines Desktop PC

Monitor light blinks but no pic when booted up


I can try to help you,\015\012do you hear the boot beep sound?\015\012if you are not able to hear the beep sound then i suggest you to open the machine and check with the cmos battery if it is working or no.\015\012if your cmos battery is working the ... E-Machines eMachines Desktop PC

My Monitor stopped flashing Digital when from off


It has to be the resolution you are setting in your display property settings, and how they look depends on what video card you are using and what brand it is ie NVidia, even so I wont know them all..\015\012\015\012We need to set the pro ... Samsung SyncMaster 731B 17" LCD Monitor

Motherboeard wont detect my ide drive


You would probably have to set it through the bios. You can enter the bios by restarting the computer and when you see the name of the mother board or computer come up keep pressing delete until your in a blue,or white menu, from there there is an op ... PC Desktops

T2893 desktop did not power on when I hit the power button


If you can find someone that has the same model, that is the best way to make sure it fits. Some other motherboards will fit, but you may have to do some work to get them to fit. The best way would be to try to do some research on your particul ... E-Machines eMachines T3830 PC Desktop

Sony Vaio Desktop Wont Boot Up. PCVRS630G. First, while using Adobe Premiere Elements4, the program froze, when I rebooted the PC a couple of times, an error showed up (which I ignored - dont know what is said). Second, when I tried to reboot, the machine will start, the "Intel Inside" logo would show up and then it will shut down and repeat the cycle again. Third, removed the power overnight, and when tried to re-boot, NOTHING will show up. Took to the store, they said it is probably the mother


Try to remove the ram and c-mos battery and repalce it again...the try to boot the system....if it boots and shows some error let me know...else if it doesn't boot...then it goto b motherboard problem...contact intel via mail support.... ... Sony VAIO DESKTOP PCV-RS630G PCV RS630G PCVRS630G P4 3.20E GHZ HT DVD+/-RW (PCVRS630GUNIT)

After factory recovery sytem wont boot


Try replacing the RAM in the machine having a problem. The drive works well in a different machine. Use the RAM out of that machine, if possible, in the machine having the problem. ... AMD eMachines Desktop System w/ 17'' CRT Display, 2.0 GHz Athlon 64 3000+ (W3400)
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5766 seconds