Having problems with your E-Machines T6528 PC Desktop ?

Emachine T6528 problem: My monitor wont boot up went i start the computer!

\015 My sister recently moved her computer to her new house. When she got here she tried to set up her computer. When she started her computer the monitor didn't boot-up with the computer. So today i thought i could by-pass the on-board monitor port, with a PCI graphics card to my dismay it didnt work. Is the computer just broke or is there something i can do about it.\015

Answers :

Easiest solution is to connect your monitor to another PC, if still nothing, then your monitor is toast.

If you are getting no display at all, and you tried a PCI video card and the onboard, most likely it is your monitor.

This is going to sound really dumb, but just incase, check to make sure both cables are snug in the monitor, I get calls daily at work with people telling me their monitor has died, only to find out that the power cord in the rear or the monitor is not completely snug.
Repair Help & Product Troubleshooting for E-Machines T6528 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Emachine T6528 problem: My monitor wont boot up went i start the computer!


Easiest solution is to connect your monitor to another PC, if still nothing, then your monitor is toast.If you are getting no display at all, and you tried a PCI video card and the onboard, most likely it is your monitor.This ... E-Machines T6528 PC Desktop

Have emachines T6528 graphics problem


If it doesn't boot at all .( this is the reason that you see that message on the screen it means that no video signal came out from the computer ) ..try to change the cable that leads from the pc to the monitor first ...and if the problem its still o ... E-Machines T6528 PC Desktop

Dell xps m1530 formatted hdd now it wont boot


You might find part of this general trouble shooting process might help? Especially the part of changing you Primary Boot drive so you can load Windows.\012\012Assuming you are Windows based and not knowing your specific OS? \012 Your p ... Dell XPS M1530 Laptop

The lap top wont start


The solution to your problem is probably not the monitor, follow these steps:1. Connect and boot your computer with 2 different monitors.2. If it does'nt work with either of them the problem is from another computer component.Posibl ... Compaq Presario 700 470024-192 Notebook

Acer ZG5 lsass.exe Part 2


You need a bootable image on your flash drive. if you ve just copied the cd files the USB wont do a thing and the monitor will keep blinking. what is the exact problem? ... Acer PC Desktops

Monitor I've had emachine for about a year with no problems then one day i turn on my computer and the picutre on the monitor is shaking and wont stop


Same thing is happening with my emchine as well. Mine is a T6412 series machine. I boought this machine a year and a half ago. Suddenly one morning the monitor started flickering. At first I thought may be some problem with the cables. I tried with ... E-Machines eMachines Monitor E15T4

Monitor reads: PC entering power saving mode then shuts off;PC on


First do not take the hard drive out and put it in another computer. It is configured to run in the computer it's in.\015\012\015\012Next, you probably did have a power surge either from your power supply or the power in your home. It s ... HP Pavilion a810n (PP164AA) PC Desktop

Massive series of problems with IBM Thinkpad


Probably itz either minor case of software corruption/improper ground/cpu fan..or major case of faulty or defective main board/ram/addon/daughter cards....plz do check the following as in order:..the Hardwa ... IBM ThinkPad R40 2897 Notebook

Cannot get new Motherboard to boot up in Normal Mode


What u may have done is wwhen u were installing the new board, gave a static shock to the system...that will cause only the fans to come on and nothing more...this is a bad problem bc u cannot fix it...if u figure out something else is wrong, and it ... Gateway PC Desktops

ACER ASPIRE 5610z BLACK SCREEN


FIX: \015\012\015\012I have an acer aspire 5520G and i can relate all too well. It worked fine for about 3weeks (from brand new!!) then one day the screen went blank while trying to boot. I managed to fix it and it worked fine for almost ... Acer Aspire 5610-4648 Notebook

Emachine T2385 Won't Boot in Normal Mode past Windows XP Screen


The first thing I would check is your video card (usually driver) problem. Start windows in safemode with networking. If this problem has occured after updating the video card driver you may try rolling back the driver to a previous version, otherw ... E-Machines Celeron 2.3GHz (rb-t2385)

T2682 emachine running fine video lite went yellow & HD also


The first thing you should do is remove the video card and try to boot\015\012the PC using the onboard video (video on the Motherboard) and see if\015\012that solves the problem. If it does, try putting the video card back\015\012in in a DIFFERENT P ... E-Machines T2682 PC Desktop

Emachines t2899 will come on and fans run but screen is still blank


Actually, the monitor is fine. The problem is that the computer isn't booting. The power comes on and the fans spin, but the system board isn't starting. Try reseating the memory modules in their sockets and clearing the CMOS memory using the jumper ... E-Machines T2899 PC Desktop

Wont work with new computer


Since this was a new out of the box computer, Safe Mode was not allowed. In order to change monitor settings (resolution), I had to use another monitor, in this case a newer CRT. With the CRT, the computer booted up, no problem. Once booted, I turned ... Princeton Digital VL173 Monitor

Emachine destop not recognising acer lcd monitor


It sounds more like the computer isn't starting up. The "no signal" message is coming from the monitor itself to tell you it's on but there's nothing coming in to display. Normally no special drivers are required for the monitor, and you'd see at lea ... Microtek C593 15" Flat Panel LCD Monitor

Emachine reboot problem


First of all remove ant cd from drive when booting up uinless you are using a bootable windows disk. if the problem still persist when then computer starts booting up keep pressing f8 until you get the choice to go in to safe mode. Once in safe mode ... E-Machines eMachines Desktop PC

Computer wont startup it cycles and repeats sony vaio pcv rx560


Ok, i do in fact know what your problem is, your OS (Operating system has crashed. this has happened to me several times. what you need to do to fix it, get a windows xp, or vista disc, and put it in the drive, u may want to press f2, and enable f12 ... Acer Aspire 3680 Laptop

Can't set up network w linksys modem


Video card:Your computer has an integrated video card but has a "PCI Express" expansion slot for an upgrade. After the upgrade you will be able to play most games without the choppy frame rate...depending on what card you buy. Since ... PC Desktops

My computer wont boot up the fan and light turn on for a second then goes right off....


Follow these steps to determine why your computer won't turn on.\015\012\015\012Computer shows no sign of power ... HP Pavilion dv9000z Notebook

Hardware malfunction - The system has halted


To get into the bios, you either need to press F1, delete or F2 as the computer boots. Look very carefully at the screen when it boots because it will only tell you briefly what key you need to press on your keyboard. Once you have got into bios us ... IBM IntelliStation M Pro 6868 PC Desktop

No screen picture


Hello,You should first try to find out if it is a screen problem. Turn the machine down, and plug a monitor to it. Turn monitor on, power up the computer and see if you get anything on the monitor. If you get something (like the boot scre ... Toshiba Satellite A135-S4527 Notebook

Computer boots fine but the monitor is blank


If the monitor works fine on your laptop, the problem definitely is at the computer, possibly with the video card (if it is using one). it could have loose connection, or parts might have damages. it seems the problem is intermittent so electr ... Computer Monitors

E machin w3502 wont work at all


I am not sure what you mean "if you reboot you will loose all the data" or do you mean reformat your hard drive? You should be able to reboot your system in safe mode which will load only the minimal drivers for your system to work. Safe mode can be ... E-Machines eMachines Desktop PC

Compaq wont Boot


Apart that replacing the motherboard on a laptop is a difficult and expensive operation, component inside must be tested, as the problem is not necessarily the motherboard.Try first starting the laptop without the battery, and only power ... HP Compaq Presario C304NR Notebook

Toshiba Sate. M35X-S19 - Blank Display


It is more than likely that it is the display that is the problem.And your original problem may have been the display and not the motherboard.Please rate this if you find it helpful.Thanks ... Toshiba Satellite M35X-S149 PC Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0915 seconds