Having problems with your Gateway FPD1775W Monitor ?

I need a driver for gateway 17 in. wide screen monitor FPD1775W

\015 I connected this monitor to my laptop and the resolution is bad. I can't reset the reolution to 1280x720 for best resolution.\015

Answers :

You might want to consider a default settings reset. To refresh or reset the monitor back to default settings, unplug the\015\012monitor's power cord, and then press the the power button for five (5)\015\012seconds to drain any residual power. Plug in and then turn on the\015\012monitor. The default settings load.

Additional information about your monitor is available on the Gateway support website.
Repair Help & Product Troubleshooting for Gateway FPD1775W Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need a driver for gateway 17 in. wide screen monitor FPD1775W


You might want to consider a default settings reset. To refresh or reset the monitor back to default settings, unplug the\015\012monitor's power cord, and then press the the power button for five (5)\015\012seconds to drain any residual power. Plug i ... Gateway FPD1775W Monitor

Monitor not working


You will need to change the display settings for the type of lcd monitor you have, it is a wide screen I am assuming, you can change this by right clicking on the desktop select properties then settings the screen resolution should be on the middle l ... Computer Monitors

I upgraded my windows 2000 desktop from a crt monitor to a flat panel one. Now the video is distored.


Afreakingcom\015\012\015\012If your video is distorted most likely the new monitor that you have is a wide screen monitor. So what you will need to do is change the resolution of the video card to a wide screen resolution. Your can do t ... E-Machines E17T4 LCD Monitor

W17e says "input not supported"


Hi - here's what I found about your wide screen monitor:The HP Pavilion w17e LCD wide-screen monitor has the following features:\015\012 \015\012\015\0121440 x 900 factory-set resolutio ... Acer AL1916W 19" LCD Monitor

We have windows 7 and all of a sudden a big black vertical bar (about 4" wide) appeared on the screen, splitting the display. The right hand part of the screen appears on the left side of the black bar. Anyway, we need the drivers for this monitor so we can reinstall (install) them on this new computer. We couldn't find the original CD for the monitor. By the way, the display was working fine for a month and a half. Don't know what updates were downloaded that might have collided with th


This could be a problem with the monitor, not with display drivers or monitor drivers. Try to connect the monitor with other system and check whether you are getting the vertical bar. If yes, need to check/repair the monitor with local expert enginee ... X2Gen MG19VT 19" LCD Monitor

Monitor goes into power saver mode


Take your Agp card with you to the shop. You do not need to go through Gateway, but there are serveal formats of AGP regarding the voltages.\015\012\015\012By the sounds of it you have the newer version of AGP so finding a replacement car ... Gateway 500 X PC Desktop

Hd2200 gateway monitor display will not stay lite


Most of the hd2200s have a problem with a bulb burning out at the end from heat. Sometimes you will get lucky and it will be just a burned wire that is shorting out. You would have to pen it up to check what you can first.The power board can so ... Computer Monitors

Monitor will not turn on


Normal 0 false false false MicrosoftInternetExplorer4 \015\012 /* Style Definitions */ table.MsoNormalTable\011{mso-style-name:"Table Normal";\011mso-tstyle-rowband-size:0;\011mso-tstyle-colband-size:0;\011mso-style-nosh ... Dell E173FP 17" LCD Monitor

I have a Gateway mx3422 notebook. I cannot get the display to clone when I hook it up to a projector. The notebook screen goes black and the display shows on the projection screen.


So, as soon as you hook up the projector, the LCD goes blank? 2 things control the output, the function key to enable the external video and the display settings in Windows. If Windows shows 2 displays (Control Panel, Display, Settings), then chang ... PC Desktops

Connecting Laptop to LCD


VGA cable doesn't carry any audio: use your audio output from PC into TV audio Input (standard RCA).You need to configure your Display Properties to manage TV screen to get an effective connection.Either you have a generic Video Grafic D ... Acer Aspire 3680 Laptop

I bought a computer gateway dual core and I plug it to a CRT but the image that is displaying is not complete is like the screen does not fit the monitor how can I setup to get the complete image on the screen the main problem will be that the image that diplays on the screens is like to big and when I move the mouse pointer its like it moves the screen, it's like I'm able to see just a piece of the screen and I try to resize this using windows display properties to adjust resolution and also I


Control panel - display - settings There is a slide bar on the lower left. slide it to the left and click apply. That will change the size of the display so all you need to do is find out what you like or what the 'native mode' is if you have a lcd ... Relisys CRT TE786H 17 1600X1200 0.25MM

LG LM190E05 (SL)(01)


Gateway has multiple part numbers for the LCD inverter board. Part numbers V01216400103, V01216400104, and V01216400105 \015\012are for the Profile 5 and 5.5 series with a 15" monitor. Part number V01316500104 and maybe others are installed in Profil ... Acer AL1916S (Silver, Black) (Black, Silver) 19" LCD Monitor

My viewsonic VA1701wb monitor having streching problem for images


The native resolution for that LCD is 1440x900. If you do not see that resolution in your display properties you can try to update the video driver. If it is still not displayed as an option you may need a newer graphics card. Many newer low end c ... ViewSonic VA1703wb Monitor

I have a new Dell Studio 540 computer and I'd like to hook it up to my Gateway EV910 monitor. I connected everything correctly. The monitor has power, turns on to the monitor self test screen where it tells me everything is okay with the monitor and then the monitor goes to power save mode. I think that I need to put a Gateway driver on the Dell in order to get it to recognize and communicate with my monitor. How do I do that? Where do I get the driver? Help!


It should recognize it immediately, and the only problem that i can think of would be your graphics card not supporting it.\015\012\015\012Here is the driver for it:\015\012 ... Gateway EV 910 19" CRT Monitor

Microtouch CRT Monitor has no picture


We have 3 Brand New 15" Micro Touch CRT monitors for sale 954-336-7587.\015\012\015\012TECH SPECS FOUND ON THE FOLLOWING PDF: http://pdf.superwarehou ... 3M MicroTouch 17" CRT Monitor

Blank Laptop Screen


Unplug everything from your laptop unplug the power from the laptop close it and turn it over remover the battery open and hold the on button(battery is still removed) for a 10 count, replace the battery\015\012turn on you can plug the power co ... Gateway MX6956 Notebook

New wide screen not compatible with my old pcv-rx650


Try, right clicking, then pushing the option of customise or personalize (depends on operating system), then it will give you an option (by where you change your background), to change the resolution. Choose one of the bigger ones, then when you hook ... Sony VAIO Digital Studio PCV-RX650 PC Desktop

Monitor goes dark after a few seconds


It looks like the video driver needs to be chcked. can you try to go to the bios of your omputer by pressing f2 on boot and let it stay there for 5 minutes? if it still goes to a black screen, its either your video card or lcd thats having a problem. ... Gateway HD2200 LCD Monitor

The operating system was reinstalled. I can't get my Acer X203H monitor to display on the entire wide screen. It displays like a standard monitor...not the widescreen picture I had before the reinstallation


Hello,After the installations of the operating system like xp or vista or others the next step is to load the drivers.Some driver get installed by the operating system while others need to be installed.Normally you have cd that came ... Acer X203H bd Monitor

Gateway laptop screen is black?


This could have several causes, including malware installed on your system, but is frequently the result of some kind of hardware driver conflict. Have you recently installed any new hardware or software to your system? If so, disconnect it and try ... Gateway 7330GZ Notebook

Starlogic 17'' as dual display not clear


Check and see if your NVIDIA drivers are up to date. Then try changing the resolution on your laptop to match the native resolution on the monitor and see if it works. If it does then you will need to look for the option to set custom resolutions on ... Computer Monitors

My monitor screen goes black it lights up about half the scree when i first turn it on then blinks like a light bulb that is not screwed in all the way then goes completly black acer al2002w


Vandetucker, You should use your warranty and use it NOW!! When "IT" goes to "BLACK" can you see the WIN-desktop when holding a bright flashlight at different angles 1 inch from screen??? How old is unit? How many "ON" hours does it have? Your monito ... Acer AL2002WSD 20''Widescreen TFT LCD VGA/DVI Monitor, 20 inch

Have just replaced CRT screen with brand new 24- inch Acer V233H LCD widescreen monitor. Couldn't get the recommended resolution, so installed SiS v3.90 driver, (the latest, I think), but my SiS Utility / Support Modes only shows CRT - the LCD part is grayed out. What SiS driver do I need for LCD? Acer says to use 1920 x 1080. I can get this setting with the new driver, but now my Desktop is way longer than the actual screen, and I have to "scroll" left and right, with the mouse, to get to e


Right click anywhere on the desktop\015\012then on the window properties.\015\012then on settings. You should now be seeing your display properties.\015\012Check the slider along the lower left to see if it matches the 1920x1080 ... Acer V233HBD Monitor

Video Problems When I start my computer up or exit anything full screen I get an "adjusting" displayed. My current resolution is set to 1280x960 on a HannsG 17" wide screen. Just recently after exiting StarCraft: BroodWar my resolution was stretched too much to the right. Now when I load up any game is says adjusting and the picture is always off. Im running XP and videocard is nvidia geforce 8600 GT. Im not very good with all the technical stuff involved in fixing this. If you need more inf


Hello!\015\012\015\012 Maybe you need to install the correct driver of your video card. But first update your motherboard driver, if you have CD/DVD utilities enlclosed in your computer from the vendor then you should reinstall that in se ... Microsoft HannsG HU171D 17" LCD Monitor

Monitor goes black suddenly


Nvdia 6600 requires a minimum of 450 Watts of power to ensure that everything works properly. So if you want to continue using your nvdia card, an upgrade will be necessary.\015\012\015\012If you want to test to see if it is the nvidia c ... Gateway 838GM (RB838GM) PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9197 seconds