Having problems with your HP Compaq ProLiant DL380 G4 Server ?

Boot problem with a ProLiant DL 380 server,

\015 Hello\015\012After a suddenly power cut our ProLiant DL 380 , can't boot , displaying the following messages :\015\012 - "the standard boot order (IPL) has been reset to the system default"\015\012\015\012- "please run the Rom Based Setup Utility to change the default boot order"\015\012\015\012- "Maintenance switch detected in the 'ON' position"\015

Answers :

To enter the BIOS of a ProLiant DL380 you have to press "F9"
When you start your pc at that time press del button continuosly so you will in the setup dep there you can change your bootable settings otherwise set it as default setting
Repair Help & Product Troubleshooting for HP Compaq ProLiant DL380 G4 Server

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

HP Proliant ML110 Server RAID setting


If you have the RAID 0+1 or 1 ,beacause of the mirroring ,2 disk will be the same.you should be attention ,if you transfer data on the first disk,you must boot your server with that disk.when the system boot completely then you put the second disk ,b ... HP ProLiant ML110 Server

Proliant DL380 G4 server occasionally rebootes.


Try to update the firmwares. Maybe the threeshould of the fans are incorrect. A new firmware can correct this problem.\015\012\015\012Let me know if this post helps ... HP Compaq ProLiant DL380 G4 Server

Dell Poweredge 4300 Bootup problem after cmos battery replacement


Check the version for the Raid Controller. This may need to have the firmware to be upgraded. If the controller is removable, take the controller out and then see if the computer will continue past the bios. If the controller is built-in, then disabl ... PC Desktops

Connect HP Proliant ML350 Server.


Hi,Please verify if your server power specs support 110 or 220 V. If you are in the US, eventhough you might have connected a 220V cable the line voltage can be 110.Check with your power company if they can provide you the necessary ... HP Compaq ProLiant ML350 G3 Server

No Boot on 1600sc


The easy answer is:\015\012\015\012Did you ensure the CPU fan connector is attached to the PROPER motherboard CPU fan power pins?\015\012\015\012The 2nd easy answer is:\015\012\015\012Are you sure your CPU is properly placed inside the socket? Could ... Dell PowerEdge 1600SC Server

My PC doesn't boot after start window normally screen.. when i click on start windows normally it doesn't boot or when i click on start window on safe mood it doesn't go beyond this line multi(0)disk(0)rdisk(0)partition(1)WINDOWSSystem32DRIVERSMup.sys please help me what should i do to solve this problem..


If you have the original CD then run it to repair or remove Mup.sys You will have to enable hidden files is sys32 folder. So type help at the DOS prompt if you exit repair or install to invoke the C:\\ Used to connect to 'novell' servers ... Partner Tech PT-5500 PC Desktop

HP proliant dl 360 g3 error code 1611 cpu fan failure


Remove all 6 fans, and then remove the fan rack itself. Then tighten\012the 2 pcb thumb-screws underneath. I believe this is sometimes the reason for false 'failed fan' reports. ... HP Compaq ProLiant DL360 G3 Server

HP Proliant ML370 Server: Led shows red light


Hi there,\015\012Your server definetly has issue booting first of all this is a little old server model so first open and blow air from a blower (&not use vaccum cleaner)since problem could be anything frm a struck cpu fan or anything ... HP Compaq ProLiant ML530 Server

Best SCSI Hard Drive Diagnostic tool for HP Hard Drives?


Hi there you have the insight diagnostic cd boot the server with it then when you boot be careful not to erase the server there you will find the offline diagnostics tool where you can select the HDD you want to diagnosis if the hdd fails it will ale ... HP ProLiant DL380 G4 Server

Booting from cdrom


Locate your copy of "SmartStart" (SS) for the proliant server. Boot into the Bios and check that the CDROM boots before the HD. Insert the CDROM Smartstart into the server and restart. When SS comes up you can use the array erase utility. Erase the a ... Compaq ProLiant ML530 Server

Problem with scsi driver proliant ml 370 for NT4


Are you attempting to boot from the Windows CD?If you are booting the server from a Windows installation disk and it is unable to detect the hard drive, this typically means the following things. You need to provide the driver for ... HP Compaq ProLiant ML530 Server

Boot problem with a ProLiant DL 380 server,


To enter the BIOS of a ProLiant DL380 you have to press "F9" ... HP Compaq ProLiant DL380 G4 Server

Help with server boot problems flashing orange lights etc


Seems the RAID is broken. You may see which drive (hot swappable?) it showing an error code with its lights in front. If not, I would suggest re-seated all drives.If you see one that is not right, remove it all the way, while it is on, then pus ... Dell PowerEdge 4600 Server

Compaq Proliant server... sort of... died


What has happened the main board system battery is old and when you moved this server has lost setup first step is clean the system check the voltage without power applied you will find low voltage replace the battery rest you setup setting If this n ... HP Compaq ProLiant 6000 Server

Unkown SCSI Problem


Hi Fatoil ,\015\012\015\012Have you tried another SCSI port , another SCSI card , another SCSI drive , swopping if it is card problem or drive or both problem ?.\015\012\015\012If you have a spare SCSI hd , plug it in to same ... HP CC3310 (a9863a) Server

Compaq Proliant 3000 Server (600mhz/512mg) Raid 5 Problemo


Well, well :-)\015\012\015\012 \015\012\015\012problem solved, that makes me\015\012fell real good all over.\015\012\015\012 \015\012\015\012- Would you mind\ ... Compaq ProLiant 3000 Server

Harddrive array sequence causing system in booting


If the only drive you changed was the drive that failed and all the others are in the correct sequence, then that's a good thing. \015\012\015\012The next question is, did you have this system setup in a RAID Array and if so, what RAID co ... HP ProLiant ML370 G4 Server

Scsi raid with battery backed memory for pweredge 2550 server


If my memory serves me correct i think this server uses a onboard (3di) card it is set in the bios to use the raid configuration, under integrated devices .make sure this is so ,as it boots press f2 key to enter.If this is so exit.next step is to sh ... Dell PowerEdge 2550 Server

Hi! I have an HP Proliant DL380 G4 server which is giving some problems of late. Sometimes after restarting the server, there is no booting or display.After several restarts, it works fine.What could be the problem?


There could be a problem of improper RAM seating or loose hard disk cables. try to reseat them. ... Computer Servers

Hp proliant ml370 g4 rebooting problem


Try to boot from smart start and do offlinr diagnostics.have you purchased second cpu seperately? Check the CPU compatibilities. ... HP ProLiant ML370 G4 Server

HPCompaq Proliant 1600


Open the cabinate and put the cmos battery from motherboard .\015\012if there is problem is still now then put the new battery in moterboard.\015\012start the computer and press DEL key from the keyboard and select the default loading and ... Computer Servers

Server doesnt boot


First create a floppy disk with your RAID driver for W2K3 Server. Next boot the server with the W2K3 Server CD, and hit F6 when prompted, and S to add the specific driver for your RAID and using the floppy to get the driver installed.\015\012 ... IBM xSeries 346 Server

OS Loaded on SCSI HDD Cashed


If the Bios did not detect the third drive, try switching it to a known working slot and see if you have a bad drive, or something wrong with the cage or cabling. The 3000 were shipped with either a 68 pin drive cage or a 80 pin drive cage. The 68 ... Compaq ProLiant 3000 Server

Nortel NetDirect error on Vista


Hi kt_rutherfor, Firstly apologies for my late reply. I thought that this was going to be a firewall problem, but looking at your error again, I now dont think that. So I'm afraid that I dont know the answer to this, I do have an idea, after research ... ASUS T3200 Notebook

HARD DRIVE PROBLEM.


If the first drive will get recognized on another computer but not yours it would lead me to believe that the controller on your motherboard went out. But the part about the non os drive not getting recognized at all leads me to believe that drve wen ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6229 seconds