Having problems with your Panasonic Toughbook 48 Notebook ?

Powers off by its self!

\015 Hi need some help with my panasonic lab-top cf-48. it powers off by itself when it is plugged into the wall while running for a little while, but when it is on battery power it seem to work for long periods of time. it shuts off faster when it is working harder (ie when i try to defrag the hard drive for instance.)\015\012\015\012please any hints or solutions would be greatly appreciated.\015\012\015

Answers :

First, have you verified that the cooling fan is working? Next, check to verify that the cooling vents are not plugged up. Also, some systems have cooling fins mounted on the CPU that get crudded up with dust. It's better to use canned air rather than a vacuum because of possible problems with static.
Ron-
Repair Help & Product Troubleshooting for Panasonic Toughbook 48 Notebook

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dell e137fp monitor flashing green...


Below you will find my recommendations for troubleshooting this issue:1. Reseat the power cord and verify a good power source. To reseat the power cord, follow the steps below: 1.1 Power down the system. 1.2 ... Dell E173FP 17" LCD Flat Panel Monitor

Power light on monitor blinks green, monitor is dark


Perform a Monitor self-test to determine whether the issue is with the Monitor or with the Video card of the Computer/with the Computer.1. Turn OFF the Monitor.2. Disconnect the video cables that connect the Monitor to the Com ... Dell Computer Monitors

My computer wont boot up the fan and light turn on for a second then goes right off....


Follow these steps to determine why your computer won't turn on.\015\012\015\012Computer shows no sign of power ... HP Pavilion dv9000z Notebook

Dell172fpb 17" monitor


Self-Test Feature Check (STFC)\015\012Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run ... Dell E171FPb 17" Flat Panel LCD Monitor

Computer will only start in safe mode hp cue root and hp help and restore are not working? what is the best resolution? hard drive failure?


I have included some directions from HP about using an embedded Hard drive test. This is done using the BIOS. Try this to rule out a hard drive problem. This is supposed to also repair some hard drive issues. Then, we can go from there. ... HP Pavilion dv9000z Notebook

Restart from hibernation


Go to the system tray and click once on the "Safely Remove Hardware Icon"click on your dvd/cdrw to stop it. when it says it's safe, go ahead and remove the drive.rebootreinstall the drive and windows should automatically ... IBM ThinkPad R40 2722 Notebook

USB device detection in Gateway Laptop


It sounds like your laptop BUS (usb power) does not have enough power to power the interface between the two. I had a couple of devices that did that. You may have to buy a SELF powered USB HUB in order to make them connect. The self powered usb wi ... Gateway GT5432 Refurbished AMD Desktop Computer - AMD Athlon 64 X2 5000+ 2.6GHz , 1GB DDR...

Samsung lcd 913v self test ok, no image when vga connected


This problem often occurs in samsung SyncMaster LCD monitors.The\015\012solution is open your look for the LCD monitor power supply module\015\012(which have PCB connector to the AC power), on that board look for\ ... Samsung SyncMaster 913V 19" LCD Monitor

When i boot up i get a message that my hard disk failure is immenent is there anyway to repair this problem


If you get a "Disk Controller Error" error messages that may occur before Windows XP or Windows 2000 is started. \015\012 \015\012 \015\012\015\012 Imminent Hard Disk Failure\015\012 ... Acer Aspire 3680 Laptop

3yr old got ahold of monitor


Ok, get to the event where you get this to happen "...then turn it back on the monitor does come on normally...", but just after power-up, press the F8 key to go to safe mode. If nothing visible, press ENTER anyway...get to safe mode yet? ... Computer Monitors

Monitor powers on for approx 8 secs then standby.Series of vertical stripes on panel but no image.Guessing the lcd is at fault?


When I applied the solution below, I go stripes when poorly reconnecting the logic board to the plate, and the plate ability to do it job can be effect by bits going on the inverter, wavely screen output etc. The lcd is an assembly kit inside have a ... iiyama ProLite E434S 17" LCD Monitor

Power is shutting down with orange light flashing on t


Hi, This is na very common problem with these Dell machines. I have found one of two things are the cause of this. \015\012\015\0121. Your memory warms up once system is on for a while and fails to make proper contact on all pins, focing s ... Dell OptiPlex GX280 PC Desktop

ACER AL1914 LCD Monitor goes black but green light stays on


The monitor is doing a self test a finding an error.\015\012The lcd has three parts, the screen plate(windows)/the logic(vga)/the\015\012inverter(power plug). Parts that go are the backlight ccfl's, behind\015\012the plate, and parts of the inv ... Acer AL1914 19" LCD Monitor

How do I undo a reformat on an HP? My HP was reformatted and I need to return it to the previous state. Already tried system restore, but prompt said there is no point to restore to. Is there a way to undo the formatting and return the computer to where it was earlier today without buying recovery software?


Troubleshooting \015\012Accessing Computer Setup \015\012The information and settings in Computer Setup are accessed from the File, Security, Tools, and Advanced menus. \015\0121. Open Computer Setup by turning on or restartin ... HP Pavilion dv4000 Notebook

System hangs after 5 minute 0f os Ubuntu


The issue might be due hardware malfunction or lack of system performance or corrupt os.\015\012\015\012perform hard drive self test:\015\012Hard Drive Self Test:\015\0121. If ... HP Pavilion dv9000z Notebook

Acer Aspire 9303, the screen remains black and 3 beep signals


I have this problem 2 days ago.. and this works on me... maybe on your's tooyou may need to flash your bios. why need to flash the bios.. ? 1. had the black screen of death. or deleted the bioshow to flash the bios ... Acer Aspire 9300 Notebook

E207WFPc Dell Monitor goes black after seconds of poweron.


Hi,\015\012 The problem you have mentioned may not be due to contrast setting but the LCD itself . Power on the mointor and disconnect the signal cable from the back. if you see a self test box running on the LCD , the LCD is oK . If you donno ... BenQ FP92W LCD Monitor

It turns off, or goes to sleep. Won't wake up.


Hello there topothemorni, \015\012\015\012Are you familiar with Windows' "Power Options" module, and that within it you can tweak all things related to power saving (e.g., system sleep, hibernate, and automatic MONITOR shut off)? More th ... Computer Monitors

Code error I have power director, When I burn my project it tells me code error a0000005, What do I do . ALSO is there a place where I can get the code errors my self to see if I can fix the problem my self. Thank you My email address is [email protected]


Before following the suggestions given below please make sure that you have the latest firmware for your DVD burner drive. Please contact your vendor or visit the manufacturer's website for the latest updates.Please follow the steps menti ... CyberLink Power DVD 5.0 (cd-powerdvd5) for PC

Power on emachine T6420 and moniter is blank. The moniter soon loses contact with the computer. The fan run and power is OK there is no beep code.


If you mean after the computer performs the self test the screen goes blank and stays blank, eventually turning off you are having a hard drive problem. When the computer boots you should see an E-Machines logo and/or a self test on the screen. Tha ... E-Machines eMachines Desktop PC

I shutdown my pc (eMachines eSystems model 314) last night, went to switch on again earlier and nothing, zilch! Won't even power up, no lights on switch, dead! Have since removed and cleaned best i could the psu and replaced correctly, but still nothing. Any ideas gratefully received?


The power supply. Go on craigs list get your self a 350 watt power supply u can get them for 10-30$ I my self have found them there for 10$ replace the power supply. Can you handle that? ... E-Machines eMachines Desktop PC

My monitor shuts off(goes blank for a few seconds


The monitor is doing a self test a finding an error.The lcd has three parts, the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, ... LG L1915S 19" LCD Monitor

Will not boot up


Simple\015\012\015\012\015\012Disconnect any USB or 1394 (Firewire) devices that are attached to the computer.\015\012\015\012Remove any CD and DVD discs from the drives.\015\01 ... HP Pavilion ze2000 Notebook

Monitor has solid green LED, but no display


... AOC LM-800 18" LCD Panel Monitor

I have a dimension 8400, I recently upgraded my graphics card. Followed the instructions, blew out the computer of dust bunnies, inserted the new card, tured on the power, machine went from start screen to no boot device available. Select F1to retry. Do not have an XP install CD. Please help


Check the power cable and ide/sata cable connecting the hard drive to the motherboard maybe they are just disconnected, if the unit is working properly before you cleaned it, or does the unit detect the hard drive and cd/dvd drive during power on sel ... Dell Dimension 8400 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4137 seconds