Having problems with your Rosewill 19" 12MS DVI R911E LCD Monitor ?

MY MONITOR IS SHOWING AN INPUT NOT SUPPORTED FLOATING MESSAGE. I JUST HOOKED IT UP TO AN EMACHINES COMPUTER. WHAT IS THE PROBLEM?


Answers :

Does the monitor work on another computer? does the computer work with another monitor? I the answer is yes to both then here is the most likely solution\015\012
you may have the screen resolution and/or the refresh rate set too high on the emachines computer. For Windows XP: Boot the computer and use F8 to get the Safe Mode boot menu. Choose the first Safe Mode and log in,... if you see windows come up then go to display settings and and change the settings to something low like 800x600 and refresh rate of 60hz. Restart the system and you will the display and can make adjustments from there. \015\012
\015\012If either the monitor does not work on another computer or the computer does not work with another monitor,.. or if you are not able to see windows from in safe mode,.. you may have a more serious problem with the monitor or vid card.
After trying to rid floating error input not supported the last and only fix I found was to try an old dell monitor on my laptop. It worked perfectly no more floater. The kicker is when I reinstalled the E machine monitor the problem was gone. I'm no geek but It must of reset something. Wish I would have done this 1st instead of all the fixes that did not do any good but waste hours of my time. Hope this helps someone else. Foune
Repair Help & Product Troubleshooting for Rosewill 19" 12MS DVI R911E LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

MY MONITOR IS SHOWING AN INPUT NOT SUPPORTED FLOATING MESSAGE. I JUST HOOKED IT UP TO AN EMACHINES COMPUTER. WHAT IS THE PROBLEM?


Does the monitor work on another computer? does the computer work with another monitor? I the answer is yes to both then here is the most likely solution\015\012you may have the screen resolution and/or the refresh rate set too high on the ema ... Rosewill 19" 12MS DVI R911E LCD Monitor

LG 2542T goes dark after showing "analog power saving mode" message


If it is saying analog signal power saving... I am wondering do you have it hooked into you computer with the white DVI cable?Is there an option on your monitor to switch modes? Analog-Digital? If you are using the white DVI cable to hoo ... LG L1717S-BN 17" LCD Monitor

Re: your suggestion for my Dell Lattitude D600 Hard Drive Problem


Ok, now we have some good discourse! While I'd always prefer to use a friend's laptop to test my fringe hypotheses, having your own is a fine option too. And it sounds like you have an enclosure too, so you are pretty much all set. It's r ... PC Laptops

Dell Laptop - Inspiron 1525 - Electrical Sparks w/HDMI Cable and Dell Adapter


Now shortage,.. why you dit not use the s video connector? if you want to show the move from the laptop computer to tv, just s video to tv. tv out..should...\015\012\015\012if som burn or damage in board that is big problem.. you need to ... Dell Inspiron 1525 Laptop

The computer is asking for system diskette,what should i do?


Are their any disks in the CD/DVD or the floppy drives? That would cause this. It is the most common cause. Is S.M.A.R.T. turned on in the BIOS? You will see a message during the POST that says it is enabled or disabled. The POST is the " ... Acer Veriton 7100 PC Desktop

Proview PRO576 error message "mode not supported" and will show nothing else


Okay, we got a fix by having another monitor hooked up to our computer and going in to display and changing the display settings to a lower setting. The screen resolution - turn it to lower - I guess somehow - the setting was too high for our monito ... Proview PRO576 15 in. Flat Panel LCD Monitor

I have a flat screen tv and monitor combi i want to add


Yes, it should be possible. I need to ask if you connected your PC through the DVI or RGB input from the back of the computer to the TV. There are 2 main connections for computer monitors. One looks like a plug with 15 pins in 3 rows of 5 (RGB) and t ... PC Desktops

Acer 20" LCD monitor AL2016W, INPUT NOT SUPPORTED message


Try to reinstall the drivers for the monitor and see if that works.\015\012\015\012http://www.driversdown.com/drivers/A ... Acer AL2016W 20" LCD Monitor

Have emachines T6528 graphics problem


If it doesn't boot at all .( this is the reason that you see that message on the screen it means that no video signal came out from the computer ) ..try to change the cable that leads from the pc to the monitor first ...and if the problem its still o ... E-Machines T6528 PC Desktop

Computer does not recognize DVD drive


I had this problem on my computers search the internet and there is a step by step which will solve it. worked on my pc and laptop\015\012Many third-party programs that control CD or DVD burning (as well as some player applications) install CD- ... HP Pavilion dv9000z Notebook

Emachine destop not recognising acer lcd monitor


It sounds more like the computer isn't starting up. The "no signal" message is coming from the monitor itself to tell you it's on but there's nothing coming in to display. Normally no special drivers are required for the monitor, and you'd see at lea ... Microtek C593 15" Flat Panel LCD Monitor

Input not supported icon shows up


Is there a reset, restore button on the monitor? If so, press it.If this doesn't solve the problem, start Windows in Safe Mode by pressing on the F8 key as it is booting. When you get the black & white menu, choose safe mode. You should ... Acer X193W LCD Monitor

I have an acer aspire 5735z. I left it online one night and in the a.m. it started 'misbehaving'. I press the power up button and it begins to boot - but never shows the screen and then shuts down. A few seconds later it tries to start up again and then shuts down without the screen even coming up. I've tried rebooting after taking out battery and then disconnecting a/c - no luck. Can anyone tell me what is going on and/or help. Thanks so much for any input!


Hello,The problem must be on your Operating System (OS), it must have been\015\012corrupted and is failing to load the operating system. This could be\015\012caused by a number of reasons, which may include, a recently installed\015\012pr ... Acer Aspire 5735 Notebook

If you monitor is showing the message no signal this means that the monitor is not receiving a signal from your computer and/or receiving a signal that it does not understand. So the first thing I would do is remove any extra connectors between the computer and monitor like a KVM Switch. Next if you still have trouble I would try the monitor on another computer. If it works we know the problem is with the computer. If the issue is with the computer you may want to reset the video card to make su


Hi , check the pins in the monitor plug as they can be bent , and also check your mointor is set to accept an input from your lead ( serial/hdmi etc ) Some monitors have a built diagnostic which is often colour bars , if your monitor sh ... HP Media Center m1080n (PC099A#ABA) PC Desktop

Computer in black screen, no energy outputted


A few possibilities(the only problem is if you never get any display to try many of these suggestions):\015\012\015\012-Suspend. With suspend, everything is put to RAM and the computer goes to low power state, shutting off USB, HD, and most other thi ... E-Machines eMachines T3830 PC Desktop

Information and help


It sounds like you have just recently installed a fresh copy of windows, I would suggest reinstalling again. If not, you can try re-downloading your driver from another location. (My link)\015\012\015\012 ... PC Desktops

"No signal detected" when LCD connected with DVI-D Cable


Thank you for providing your configuration details.\015\012You have failed to specify wheather or not your LCD Display is under Warrenty.\015\012\015\012Perhaps these simple trouble shooting procedures will get the job done.\0 ... BenQ FP71E 17" LCD Monitor

Resolution Issue "Not Optimum"


Hi Guys.\015\012I have had this problem and after a bit of searching found that it is a known problem.\015\012Give Samsung a ring and if it's in warranty they will replace it ... Samsung SyncMaster 913V 19" Flat Panel LCD Monitor

Samsung GH19LS LCD Monitor wont display computer signals


You should have received two cables with the monitor. One is for VGA and plugs into you video card or computer board . The second one is for DVI digidal video and if you have that cable it plugs into the square connector. Then if you look into you ... Samsung SyncMaster 910MP 19" LCD Monitor

Dell Laptop - Inspiron 1525


Hi there.I'm sorry to say but it sounds like there has been a massive power surge causing the motherboard to fry, there is no doubt that this has caused serious damage which is probably now beyond economical repair.If you have any warrant ... Dell Inspiron 1525 Laptop

Control Button stopped working? How to reset?


Actually it matters not what computer you have, it's the operating system that's the problem. This is a very common fault in windows 7 and to a lesser extent XP. There are a few problem areas and solutions. Firstly, forget uninstalling the keyboard d ... Dell Inspiron 6400 Notebook

I have just set up new desktop Acer. Error message: No input signal.


Check the website for drivers. But it seems to me that there is another problem most computer boot up no matter what screen is hook up. have you tried any other monitors ? If you have and the work im not sure what your issue is but i would say that ... Acer Aspire™ T180 PC Desktop

Emachine Monitor comes on a few minutes and cuts back off


I have the same problem and I think its the circuit board on the power on button and blue led. I unplug the board when the monitor is on and then the monitor stays on and works OK.\015\012It don't make any sence it is only 3 parts switch led co ... E-Machines eMachines Monitor E15T4

I have a s-video output and hooked it up though a cable to the yellow rca on the back of the tv. how do i get that to work and watch the computer screen on tv


Ok there can be several ways to do this\015\012 now it depends on the outlets on both your tv and your computer and video cards installed some computers and tvs require a converter to let the signal out properly and to the best possible resolut ... HP Pavilion dv1000 Notebook

No video output from my computer.


Are you using an ON-board graphics adapter or a separate VIDEO CARD? Some motherboards lets you set the video output to "DISABLE ONBOARD GRAPHICS" if you have installed a video card (BIOS). You may have plugged the monitor cable to the onboard D-sub ... SAMTRON 94B 19 inch LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9322 seconds